What is the purpose of the Venturi Injector?

To create a vacuum effect during ozone application and allow for additive materials to be mixed during the process.

Can the Venturi Injector be used with any of your products?

Yes, it can be used with any of our products.

What size PVC pipe is recommended for use with the Venturi Injector?

It is recommended to use a 2 PVC pipe.

Does this injector need a check valve?

The top inlet for the ozone has a built in check valve.

What is the measurement of the pipe that draws in the air? Can I attach a 1/4 inch air hose to it?

The measurement is 1/4 inch barb fitting. Yes, you can use a 1/4 inch ID flexible line with this barb.

Will it work for under 5 gpm flow?

Yes, the 1" injector can handle 5 GPM.

Can this be used for irrigation in farming?

Yes, this injector can be used for irrigation.

I have a 2 inches pipe, what size of venturi should I buy? Can I use a smaller 2 inches venturi?

For what application? You can use a smaller venturi on a larger pipe size and make an injector manifold with a bypass valve.

What is the suction capacity?

The suction capacity ranges from 2 to 6 liters depending on water flow rate and other factors.

Do you attach a tube on the top section of the injector or should I make one myself?

Yes, there is a 1/4 inch plastic tube that feeds air to the venturi throat. It is recommended to buy the proper size of injector for your flow rate as manufacturing an efficient injector yourself would be difficult.

I want to use this to mix ozone with water. What pressure do I need through the 1/4 inch connector?

The pressure required depends on your specific setup and ozone generator. It is suggested to have a mixer after the injection site to maximize contact with the water.

What pressure is this rated for? Can it be used in a well water system to inject air?

This venturi can be used to inject air into a well water system. The specific pressure rating is not mentioned.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/71CjeguaOqL._AC_SL1500_.jpg

A2Z Ozone

1 Inch PVDF Venturi Injector

Item #:19778761

4.7 rating

Write a review

PKR 19542

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Create a vacuum effect during ozone application with our Venturi Injector

Product Details

Material
Brand
Item dimensions L x W x H
Inlet Connection Type
Global Trade Identification Number
Manufacturer
UPC
Product Dimensions
Item Weight
ASIN
Country of Origin
Item model number
Is Discontinued By Manufacturer
Material
Brand
Item dimensions L x W x H
Inlet Connection Type
Global Trade Identification Number
Manufacturer
UPC

Features & Benefits

Pair with any of our ozone generators
Recommended to use a 2 PVC pipe
Draw additive material through suction port and mix during application process
1 Inch NPT Venturi for Spa and Hot Tub Ozonator
For Swimming Pool Ozonator
For Water Treatment Chemical

Product Description

1 Inch PVDF Venturi Injector

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the purpose of the Venturi Injector?
Answer : To create a vacuum effect during ozone application and allow for additive materials to be mixed during the process.
Question : Can the Venturi Injector be used with any of your products?
Answer : Yes, it can be used with any of our products.
Question : What size PVC pipe is recommended for use with the Venturi Injector?
Answer : It is recommended to use a 2 PVC pipe.
Question : Does this injector need a check valve?
Answer : The top inlet for the ozone has a built in check valve.
Question : What is the measurement of the pipe that draws in the air? Can I attach a 1/4 inch air hose to it?
Answer : The measurement is 1/4 inch barb fitting. Yes, you can use a 1/4 inch ID flexible line with this barb.
Question : Will it work for under 5 gpm flow?
Answer : Yes, the 1" injector can handle 5 GPM.
Question : Can this be used for irrigation in farming?
Answer : Yes, this injector can be used for irrigation.
Question : I have a 2 inches pipe, what size of venturi should I buy? Can I use a smaller 2 inches venturi?
Answer : For what application? You can use a smaller venturi on a larger pipe size and make an injector manifold with a bypass valve.
Question : What is the suction capacity?
Answer : The suction capacity ranges from 2 to 6 liters depending on water flow rate and other factors.
Question : Do you attach a tube on the top section of the injector or should I make one myself?
Answer : Yes, there is a 1/4 inch plastic tube that feeds air to the venturi throat. It is recommended to buy the proper size of injector for your flow rate as manufacturing an efficient injector yourself would be difficult.
Question : I want to use this to mix ozone with water. What pressure do I need through the 1/4 inch connector?
Answer : The pressure required depends on your specific setup and ozone generator. It is suggested to have a mixer after the injection site to maximize contact with the water.
Question : What pressure is this rated for? Can it be used in a well water system to inject air?
Answer : This venturi can be used to inject air into a well water system. The specific pressure rating is not mentioned.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

1 Inch PVDF Venturi Injector

This 1 Inch PVDF Venturi Injector is a versatile product that can be used for various applications including irrigation. It can handle 5 GPM and has a suction capacity of 2 to 6 liters depending on water flow rate and other factors. The top inlet for ozone has a built-in check valve and the pipe for drawing air has a 1/4 inch barb fitting. The injector will only draw air when the flow rate is adequate to develop negative pressure.

Pros

Versatile and can be used for various applications including irrigation
Can handle 5 GPM
Has a suction capacity of 2 to 6 liters

Cons

The injector will only draw air when the flow rate is adequate to develop negative pressure

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

1 Inch PVDF Venturi Injector

View Cart & Checkout