Does this product work with other vehicles besides those listed?

Yes, this product works with other vehicles as long as the dimensions in the product image match the vehicle's.

What is the diameter of the threaded hole?

The diameter of the threaded hole is 5/8 inch.

Is this product safe to use?

This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Use with caution and follow instructions carefully.

Has anyone used this on a 5gen 4runner?

No but I purchased it to be used on a Mercedes R350 that I was replacing the drivers front axle on . It worked great.

Can u \ any one confirm that works on rzr rear / front axles ?

Unfortunately we do not have the application data for an RZR vehicle, but the 63mm or 2-1/2" wide opening allows for above average sizes.

This works for toyota corolla 2009?

Not sure if you are telling or asking, but #1040 is most likely too wide for a Toyota Corolla application. We believe #4245 is better suited for the Corolla.

Is this the only size it comes in? are wider and narrower openings available?

A narrower option is available, but not larger. 4245 - CV Joint Puller - Pulls CV joints with hidden retaining rings without damaging the roller bearing inside the joint. Use with CTA #4310 Axle Puller. 5/8" - 18 threaded hole. 1 7/8" (48mm) wide opening.

1992 Celia cv axle remover

https://www.ctatools.com/image/cache/data/2021/1040%20Dimensions-750x750.jpg

Will this work on a nissan versa cv axle?

Unfortunately we do not have an answer for this application, but we recommend measuring the vehicle end to verify. 63mm / 2 1/2" wide opening allows proper fitment on applications where CTA #4245 will not fit. 5/8" - 18 threaded hole works with CTA #A490 Puller plus other standard pulling tools. Forged steel construction with black finish.

Will this work on a 2000 Volvo xcv70 all-wheel drive?

Unfortunately we do not have all application data available, but we recommend using the product specifications (63.5mm wide opening allows proper fitment wide applications) to determine fitment. We recommend use with 5/8" - 18 thread standard pulling tools.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/71kLwDVO0OL._AC_SL1500_.jpg

CTA Tools

CTA Tools 1040 CV Joint Puller Adapter with Wide Opening

Item #:10903417

4.7 rating

Write a review

PKR 10014

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

This CV joint puller adapter helps extract the inner CV joint from wide-style Inner CV Joint Assemblies on Ford F150 4WD and other vehicles.

Product Details

Features & Benefits

Services the wide style Inner CV Joint Assembly found on Ford F150 4WD and other vehicles.
63.5mm wide opening allows proper fitment for wide applications.
Compatible with 5/8 18 threaded hole works with CTA #A490 Puller and other standard pulling tools.
Forged steel construction with black finish
Allows quick and efficient removal of inner CV joint.
Ideal for 1997 2017 Ford F-150 (4.2L, 4.6L, 5.4L), 2010-2014 Ford F-150 SVT Raptor (6.2L), 1997-2017 Ford Expedition (4.6L, 5.4L), & 2007-2015 Lincoln Navigator (5.4L).

Product Description

CTA Tools 1040 CV Joint Puller Adapter with Wide Opening

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : Does this product work with other vehicles besides those listed?
Answer : Yes, this product works with other vehicles as long as the dimensions in the product image match the vehicle's.
Question : What is the diameter of the threaded hole?
Answer : The diameter of the threaded hole is 5/8 inch.
Question : Is this product safe to use?
Answer : This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Use with caution and follow instructions carefully.
Question : Has anyone used this on a 5gen 4runner?
Answer : No but I purchased it to be used on a Mercedes R350 that I was replacing the drivers front axle on . It worked great.
Question : Can u \ any one confirm that works on rzr rear / front axles ?
Answer : Unfortunately we do not have the application data for an RZR vehicle, but the 63mm or 2-1/2" wide opening allows for above average sizes.
Question : This works for toyota corolla 2009?
Answer : Not sure if you are telling or asking, but #1040 is most likely too wide for a Toyota Corolla application. We believe #4245 is better suited for the Corolla.
Question : Is this the only size it comes in? are wider and narrower openings available?
Answer : A narrower option is available, but not larger. 4245 - CV Joint Puller - Pulls CV joints with hidden retaining rings without damaging the roller bearing inside the joint. Use with CTA #4310 Axle Puller. 5/8" - 18 threaded hole. 1 7/8" (48mm) wide opening.
Question : 1992 Celia cv axle remover
Answer : https://www.ctatools.com/image/cache/data/2021/1040%20Dimensions-750x750.jpg
Question : Will this work on a nissan versa cv axle?
Answer : Unfortunately we do not have an answer for this application, but we recommend measuring the vehicle end to verify. 63mm / 2 1/2" wide opening allows proper fitment on applications where CTA #4245 will not fit. 5/8" - 18 threaded hole works with CTA #A490 Puller plus other standard pulling tools. Forged steel construction with black finish.
Question : Will this work on a 2000 Volvo xcv70 all-wheel drive?
Answer : Unfortunately we do not have all application data available, but we recommend using the product specifications (63.5mm wide opening allows proper fitment wide applications) to determine fitment. We recommend use with 5/8" - 18 thread standard pulling tools.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

CTA Tools 1040 CV Joint Puller Adapter with Wide Opening

The CTA Tools 1040 CV Joint Puller Adapter with Wide Opening is a useful tool for removing CV shafts. The product offers a 63mm or 2-1/2" wide opening, which allows for above-average sizes and proper fitment, even where the CTA #4245 won't fit. The product is made from forged steel with a black finish and has a 5/8" - 18 threaded hole that works with CTA #A490 Puller plus other standard pulling tools. However, there is no application data available for certain vehicles, so measurements are recommended. The product has received positive reviews with users praising its ability to pull out stuck axles. However, some users have noted that the metal can fatigue or flex when effort is applied, and the product may not work on certain axles near the transmission.

Pros

Wide opening allows for proper fitment on above-average sizes and where other products won't fit.
Made from forged steel with black finish.
5/8"
18 threaded hole works with CTA #A490 Puller plus other standard pulling tools.
Positive reviews with users praising its ability to pull out stuck axles.

Cons

No application data available for certain vehicles, so measurements are recommended.
Metal may fatigue or flex when effort is applied.
May not work on certain axles near the transmission.

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

CTA Tools 1040 CV Joint Puller Adapter with Wide Opening

View Cart & Checkout