What is the maximum flow rating of the valve?

The valve has a maximum flow rating of 25 gal./min.

Can the relief valve be adjusted?

Yes, the relief valve can be adjusted up to 2750 PSI.

What is the adjustable detent release pressure range?

The detent release pressure can be adjusted from 600 to 2000 PSI.

What is the length of the valve and the distance between the work ports?

Work ports are 2.5" center to center. Overall length is 9" not including the handle. Width is 4 1/4". The valve is 2.5" thick.

Does the valve automatically retract the cylinder?

No, it does not retract automatically, but once you move the lever to the retract position it stays there until the cylinder is retracted.

Can this valve be stacked?

No, the valve is a mono block valve which cannot be stacked.

Can the handle be rotated 90 degrees?

No, it can only be rotated 180 degrees.

What are the sizes of the input and output fittings?

The input and output fittings are 3/4" and it has 1/2" working ports.

Can the handle be rotated 180 degrees?

No, from the position you see in the pic, it goes forward/back 20 degrees or thereabouts.

What type of pressure gauge is needed to check detent pressure on a 20 ton log splitter, and where should it be installed?

Any pressure gauge that fits the fittings can be used. It can be installed where the hydraulic fluid hose goes into the detent.

Can two of these valves be union together?

Yes, as long as oil can go through inlet to outlet to inlet to sump it will work. Only one will work at a time.

What are the mounting hole dimensions on center?

The valve has 3 mounting holes, and the dimensions on center are 4 5/8" x 3".

Is this valve for open center or blocked center systems?

This Prince log splitter detent valve is for open center systems.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/61pVI5IPTpL._SL1500_.jpg

Prince

Valve, 4 Way, 34 In NPT

Item #:788749

4.7 rating

Write a review

PKR 76005

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Prince Log Splitter Detent Valve with relief valve adjustable up to 2750 PSI and flow rating up to 25 gal./min.

Product Details

Brand
Exterior Finish
Inlet Connection Type
Outlet Connection Type
Number of Ports
Valve Type
Manufacturer
Package Dimensions
Brand
Exterior Finish
Inlet Connection Type
Outlet Connection Type
Number of Ports
Valve Type
Manufacturer

Features & Benefits

Relief valve can be adjusted to 2750 PSI.
Flow rating up to 25 gal./min.
Spring centered in one direction, pressure released detent in the other direction.
Kicks back to neutral when cylinder completes stroke.
Handle can be installed in up or down position.
Detent release pressure adjustable from 600 to 2000 PSI.

Product Description

Valve, 4 Way, 34 In NPT

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the maximum flow rating of the valve?
Answer : The valve has a maximum flow rating of 25 gal./min.
Question : Can the relief valve be adjusted?
Answer : Yes, the relief valve can be adjusted up to 2750 PSI.
Question : What is the adjustable detent release pressure range?
Answer : The detent release pressure can be adjusted from 600 to 2000 PSI.
Question : What is the length of the valve and the distance between the work ports?
Answer : Work ports are 2.5" center to center. Overall length is 9" not including the handle. Width is 4 1/4". The valve is 2.5" thick.
Question : Does the valve automatically retract the cylinder?
Answer : No, it does not retract automatically, but once you move the lever to the retract position it stays there until the cylinder is retracted.
Question : Can this valve be stacked?
Answer : No, the valve is a mono block valve which cannot be stacked.
Question : Can the handle be rotated 90 degrees?
Answer : No, it can only be rotated 180 degrees.
Question : What are the sizes of the input and output fittings?
Answer : The input and output fittings are 3/4" and it has 1/2" working ports.
Question : Can the handle be rotated 180 degrees?
Answer : No, from the position you see in the pic, it goes forward/back 20 degrees or thereabouts.
Question : What type of pressure gauge is needed to check detent pressure on a 20 ton log splitter, and where should it be installed?
Answer : Any pressure gauge that fits the fittings can be used. It can be installed where the hydraulic fluid hose goes into the detent.
Question : Can two of these valves be union together?
Answer : Yes, as long as oil can go through inlet to outlet to inlet to sump it will work. Only one will work at a time.
Question : What are the mounting hole dimensions on center?
Answer : The valve has 3 mounting holes, and the dimensions on center are 4 5/8" x 3".
Question : Is this valve for open center or blocked center systems?
Answer : This Prince log splitter detent valve is for open center systems.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

Valve, 4 Way, 34 In NPT

The Prince Log Splitter Detent Valve is a well-built valve suitable for open center systems. It has a 4-way, 3-position configuration and comes with a handle that can be rotated 180 degrees. The valve has three mounting holes measuring 4 5/8" x 3" on center and 3/4" input and output fittings. This valve is not stackable and does not retract cylinders automatically. However, after moving the lever to the retract position, it remains there until the cylinder is retracted. The valve has 1/2" working ports, and its work ports are 2.5" center to center. The valve is 2.5" thick, 9" long (excluding the handle), and 4 1/4" wide. The valve plugs are fitted with female hex end pipe plugs. However, some customers have complained that the pipe plugs used to plug the ports are glued in place with thread lock and then powder-coated. It can be challenging to remove the pipe plugs to find the right wrench size to fit them properly. Overall, this is a robust valve that works great in log splitters. It is a superior product compared to other cheaper valves available on Amazon and is an exact match for many broken wood splitter valves.

Pros

Robust and well-built
Suitable for open center systems
Has 4-way, 3-position configuration
Handle can be rotated 180 degrees
Three mounting holes
Exact match for many broken wood splitter valves

Cons

Not stackable
Does not retract cylinders automatically
Challenging to remove the pipe plugs
Some customers complained about the bolt being made from cheap metal

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

Valve, 4 Way, 34 In NPT

View Cart & Checkout