What devices is WiLoader compatible with?

WiLoader is compatible with Uno & Mega Arduino boards and supports ATMega and ATTiny series via AVRISP & Arduino Uno & Mega via AVRISP and Serial Bootloader

What type of protection does WiLoader offer?

WiLoader offers overvoltage and overcurrent protection to your devices

Is WiLoader capable of programming boards with 3.3v voltage?

Yes, WiLoader is capable of operating with supply voltage from 3.3v to 5.5v. It can also program boards with IO voltages from 1.8v to 5.5v.

Is it possible to use multiple WiLoaders simultaneously?

Yes, you can use multiple WiLoaders simultaneously, such as for programming multiple robots or boards. WiLoaderFX software supports this.

Is WiLoader capable of programming boot-loader on Arduino boards?

Yes, WiLoader can program the boot-loader on desired boards using the AVR ISP protocol.

Do I need an internet connection when using WiLoader?

No, WiLoader can perform tasks without an Internet connection as long as your computer and WiLoader are connected to the same WiFi network.

What MCUs can WiLoader program?

WiLoader can program all ATMega and ATTiny micro-controllers that support AVR ISP protocol via SPI ports. It can also program Arduino Uno and Mega boards with bootloader support.

Does WiLoader work with Leonardo-based Arduino boards?

Yes, WiLoader can be used to program Leonardo-based Arduinos using SPI pins (AVR ISP) for uploading sketches.

Can WiLoader be used to program AVR MCUs without Arduino IDE or with Atmel Studio and CodeVision?

Yes, WiLoader can be used with WiLoaderFX Hex-loader or directly from Atmel Studio and CodeVisionAVR softwares according to the user manual instructions.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/81ZpcIKSsYL._AC_SL1500_.jpg

PetuniaTech

WiLoader: The Wireless WiFi Programmer for AVR & Arduino - 5V3.3V AVR ISP WiFi-UART Port

Item #:18957168

4.7 rating

Write a review

PKR 9238

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

WiLoader is a standard AVR ISP programmer over WiFi, with a WiFi-UART debug port and 6 pin ICSP connector that supports ATMega and ATTiny MCUs via SPI interface and Arduino bootloader.

Product Details

Product Dimensions
Item Weight
ASIN
Is Discontinued By Manufacturer
Date First Available
Manufacturer

Features & Benefits

Uses WiFi for programming and communication
Compatible with Uno & Mega Arduino boards
Supports ATMega and ATTiny series via AVRISP & Arduino Uno & Mega via AVRISP and Serial Bootloader
Standard 6 pin ICSP connector
Cross platform Hex Loader Software and Arduino IDE with Atme Studio integration
Overvoltage and overcurrent protection

Product Description

WiLoader: The Wireless WiFi Programmer for AVR & Arduino - 5V3.3V AVR ISP WiFi-UART Port

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is WiLoader?
Answer : WiLoader is a standard AVR ISP programmer over WiFi, with a WiFi-UART debug port and 6 pin ICSP connector that supports ATMega and ATTiny MCUs via SPI interface and Arduino bootloader.
Question : What devices is WiLoader compatible with?
Answer : WiLoader is compatible with Uno & Mega Arduino boards and supports ATMega and ATTiny series via AVRISP & Arduino Uno & Mega via AVRISP and Serial Bootloader
Question : What type of protection does WiLoader offer?
Answer : WiLoader offers overvoltage and overcurrent protection to your devices
Question : Is WiLoader capable of programming boards with 3.3v voltage?
Answer : Yes, WiLoader is capable of operating with supply voltage from 3.3v to 5.5v. It can also program boards with IO voltages from 1.8v to 5.5v.
Question : Is it possible to use multiple WiLoaders simultaneously?
Answer : Yes, you can use multiple WiLoaders simultaneously, such as for programming multiple robots or boards. WiLoaderFX software supports this.
Question : Is WiLoader capable of programming boot-loader on Arduino boards?
Answer : Yes, WiLoader can program the boot-loader on desired boards using the AVR ISP protocol.
Question : Do I need an internet connection when using WiLoader?
Answer : No, WiLoader can perform tasks without an Internet connection as long as your computer and WiLoader are connected to the same WiFi network.
Question : What MCUs can WiLoader program?
Answer : WiLoader can program all ATMega and ATTiny micro-controllers that support AVR ISP protocol via SPI ports. It can also program Arduino Uno and Mega boards with bootloader support.
Question : Does WiLoader work with Leonardo-based Arduino boards?
Answer : Yes, WiLoader can be used to program Leonardo-based Arduinos using SPI pins (AVR ISP) for uploading sketches.
Question : Can WiLoader be used to program AVR MCUs without Arduino IDE or with Atmel Studio and CodeVision?
Answer : Yes, WiLoader can be used with WiLoaderFX Hex-loader or directly from Atmel Studio and CodeVisionAVR softwares according to the user manual instructions.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

WiLoader: The Wireless WiFi Programmer for AVR & Arduino - 5V3.3V AVR ISP WiFi-UART Port

The WiLoader is a wireless WiFi programmer that can program boards with IO voltages from 1.8v to 5.5v and is capable of operating with supply voltage from 3.3v to 5.5v. It is able to program multiple boards, and comes with the AVR ISP protocol that is used for bootloaders on Arduino boards. The device does not require an internet connection, but must be connected to the same WiFi network as your computer. The product is compatible with all ATMega and ATTiny micro-controllers and can be programmed via the SPI ports using WiLoader. However, it is not compatible with newer versions of the Arduino IDE. Reviews of the device are mostly positive with users praising the ease of use and speed of programming. The wifi setup is reported as being a hassle and integration with the phone app is limited.

Pros

Wireless and easy to use
Capable of programming multiple boards with a range of IO voltages
Does not require an internet connection

Cons

Not compatible with newer versions of Arduino IDE
Wifi setup is reported to be a hassle
Integration with the phone app is limited

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

WiLoader: The Wireless WiFi Programmer for AVR & Arduino - 5V3.3V AVR ISP WiFi-UART Port

View Cart & Checkout