What is the crimping range of this tool?

The crimping range is 0.25-6mm²/23-10AWG.

How many wire ferrules connectors are included in the kit?

The kit includes 1135PCS of single-line ferrules connectors and 365PCS of twin-line ferrules connectors.

Can the crimping plier be adjusted for different terminals?

Yes, it has an adjustable pressure feature that can be adjusted towards the '-' direction for larger terminals and towards the '+' direction for smaller terminals.

What is the difference between the hexagonal ferrule crimping tool compared to the four-sided ferrules crimper?

It depends on the terminal you would use. For some square terminals you will achieve better contact surface with square crimping tool, and the hex crimped ferrules will fit better into round terminals.

Can the ferrules be bent to fit screw terminals?

As an electrical engineer, I do not recommend bending a ferrule, regardless of length. Consider a crimp spade connector or ring terminal for your application instead of a ferrule.

What is the size of the aperture when fully open? Could this be used for small ring/spade terminals?

No this crimper isn’t designed for small ring/ spade terminals. You need different style of crimper tool and dies. WireFy crimper and die set I recently purchased is very inexpensive and has multiple dies for various connectors.

Which connectors are compatible with this tool?

Hi Thomas S, Unfortunately the AWG (American Wire Gauge system) is a confusing (and non-linear) system to work in. The claim of this tool being able to handle a Ferrule of 6mm represents a cross sectional area (with units of square millimeters). According to a table on AWG in Wikipedia, a AWG-10 wire has a cross sectional area of 5.26(square mm) which will fit into the 6(square mm) Ferrule. An AWG-6 wire has a diameter about 60% larger than an AWG-10 wire and a cross sectional area about 2.5 times as large (at 13.3 (square mm)). Hope this helps un-confuse.

I need a tool that will crimp 10 and 12 gauge wires. Will this hold up?

Yes. I spent last week crimping 12 gauge ferrules with no issues.

Can this be used to enlarge 22ga wires so that they can be crimped into a red (18ga) ring terminal?

I do not see why you could not do that. The crimper works very well and holds the wire very tight.

Will this work to wire up a car amplifier?

Yes, it can. Please pay attention to the specifications.

Can you connect two wires together with this?

If you can fit the wires in the ferrule you can crimp them together.

Can I use these on 0 gauge wire for my amp. 3000 watts?

No tool is made for much smaller wire.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://images-cdn.ubuy.co.in/6617b00fa7990536b4474988-ferrule-crimping-tool-kit-with-1900pcs.jpg

Preciva

Ferrule Crimping Tool Kit with 1900PCS Wire Connectors, Preciva Hexagonal AWG23-10 Sawtooth Self-Adjustable Ratchet Wire Terminals Crimper Kit

Item #:78868871

4.7 rating

Write a review

PKR 13350

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

This crimping tool offers superior performance, enabling even crimping on all six sides, resulting in a perfect hexagonal shape.

Product Details

Brand
Color
Item Weight
Handle Material
Grip Type
Package Weight
Country of Origin
Date First Available
What is in the box

Features & Benefits

Superior performance for perfect hexagonal crimping
Suitable for various professional scenarios
Preferred choice among engineers and electricians
Ergonomic handle design reduces hand fatigue
High level of security for firm connections
Includes 1500PCS wire ferrules connectors

Product Description

Ferrule Crimping Tool Kit with 1900PCS Wire Connectors, Preciva Hexagonal AWG23-10 Sawtooth Self-Adjustable Ratchet Wire Terminals Crimper Kit

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the crimping range of this tool?
Answer : The crimping range is 0.25-6mm²/23-10AWG.
Question : How many wire ferrules connectors are included in the kit?
Answer : The kit includes 1135PCS of single-line ferrules connectors and 365PCS of twin-line ferrules connectors.
Question : Can the crimping plier be adjusted for different terminals?
Answer : Yes, it has an adjustable pressure feature that can be adjusted towards the '-' direction for larger terminals and towards the '+' direction for smaller terminals.
Question : What is the difference between the hexagonal ferrule crimping tool compared to the four-sided ferrules crimper?
Answer : It depends on the terminal you would use. For some square terminals you will achieve better contact surface with square crimping tool, and the hex crimped ferrules will fit better into round terminals.
Question : Can the ferrules be bent to fit screw terminals?
Answer : As an electrical engineer, I do not recommend bending a ferrule, regardless of length. Consider a crimp spade connector or ring terminal for your application instead of a ferrule.
Question : What is the size of the aperture when fully open? Could this be used for small ring/spade terminals?
Answer : No this crimper isn’t designed for small ring/ spade terminals. You need different style of crimper tool and dies. WireFy crimper and die set I recently purchased is very inexpensive and has multiple dies for various connectors.
Question : Which connectors are compatible with this tool?
Answer : Hi Thomas S, Unfortunately the AWG (American Wire Gauge system) is a confusing (and non-linear) system to work in. The claim of this tool being able to handle a Ferrule of 6mm represents a cross sectional area (with units of square millimeters). According to a table on AWG in Wikipedia, a AWG-10 wire has a cross sectional area of 5.26(square mm) which will fit into the 6(square mm) Ferrule. An AWG-6 wire has a diameter about 60% larger than an AWG-10 wire and a cross sectional area about 2.5 times as large (at 13.3 (square mm)). Hope this helps un-confuse.
Question : I need a tool that will crimp 10 and 12 gauge wires. Will this hold up?
Answer : Yes. I spent last week crimping 12 gauge ferrules with no issues.
Question : Can this be used to enlarge 22ga wires so that they can be crimped into a red (18ga) ring terminal?
Answer : I do not see why you could not do that. The crimper works very well and holds the wire very tight.
Question : Will this work to wire up a car amplifier?
Answer : Yes, it can. Please pay attention to the specifications.
Question : Can you connect two wires together with this?
Answer : If you can fit the wires in the ferrule you can crimp them together.
Question : Can I use these on 0 gauge wire for my amp. 3000 watts?
Answer : No tool is made for much smaller wire.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

Ferrule Crimping Tool Kit with 1900PCS Wire Connectors, Preciva Hexagonal AWG23-10 Sawtooth Self-Adjustable Ratchet Wire Terminals Crimper Kit

The Preciva Ferrule Crimping Tool Kit is a handy and well-designed tool for crimping ferrules. Users have praised its hexagonal design, describing it as convenient and of better quality than other brands. It is suitable for wires in the range of AWG23-10, making it versatile for various applications. However, there are limitations with using this tool for ring/spade terminals, and it's essential to match the wire sizes correctly. Some users reported that the ferrules broke easily, leading to difficulties in handling the wires.

Pros

Hexagonal design
Versatile for AWG23-10 wires
Comes with a variety of ferrule sizes
Easy to use
Includes a zippered carrying case

Cons

Ferrules break easily
Limited use for ring/spade terminals
Uneven crimping jaws
InConsistencies in product quality, as reported by some users

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

Ferrule Crimping Tool Kit with 1900PCS Wire Connectors, Preciva Hexagonal AWG23-10 Sawtooth Self-Adjustable Ratchet Wire Terminals Crimper Kit

View Cart & Checkout