What is the outer diameter and inner diameter of the canopy fittings?

The outer diameter is 1-1/2 inches and the inner diameter is 1-3/8 inches

What material are the canopy fittings made of?

The canopy fittings are made of 16 gauge, Galvanized Steel

What size pipe can the canopy connectors work with?

The canopy connectors work with 1-3/8' and 1-5/8' chainlink top rail fence pipe

Does this product use seamless pipe? Can the 1 3/8 OD pipe be inserted smoothly?

No, two pipes are welded together, and some will fit well while others might be tight.

How do you connect the roofing material?

These are for tarp type coverings, so drape the tarp, tie down at base, and use an exterior crossover rope over the head to hold the tarps in place. Ensure the uprights are firmly attached to the ground and cross brace them to prevent collapsing.

Slant roof 10 leg fittings. The low height will be 5 foot with a 9 foot width. How high should the high side be?

The highest side should be 6.913 feet. The formula is B = C * Tg12º + A where A is the lowest height, B is the highest height, and C is the width.

What is the maximum span for the high peak connectors?

It is difficult to determine the maximum span as it depends on the desired height of the side wall.

I have a 20x20 tarp. How much will I lose from the width because of the 120° roof pitch?

The width of the finished canopy will be approximately 17.3 ft.

Can it be 10 ft. tall and 20 ft. wide?

Yes, such dimensions are acceptable.

Can I use this for my 20x40 tent?

This product could serve your intended purpose well, subject to a few structural design considerations. No single pipe segment should exceed 10 ft in length without an intermediate supporting member. The 20-ft width of the structure should be the end width, which will have a peak in the center. These 5 peaks will be installed a maximum 10-ft apart to obtain the desired 40-ft length.

Where would one get the pipes for legs and beams?

You can purchase them at a fence supply store where they may also cut them to the needed length for you.

Do you have 4-way connectors?

Yes, they have 4-way connectors for the center of the pen and to add on sections if you want to make the pen longer.

Can you use PVC pipe with these?

No, PVC pipes cannot be used with these connectors.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/61qLeSWyPlL._AC_SL1500_.jpg

G GOODSZONE

Canopy Fittings Frame Kit 1-38 Connectors Couplers Carport Tent Shed 3 Way, 4 Way Set 3Pack 4-Way Gray

Item #:43022736

4.7 rating

Write a review

PKR 19453

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

You can assemble any size Canopy Carport Frame, such as 10' x 20'; 10' x 30'; 10' x 40'

Product Details

Item Weight
Manufacturer
Item model number

Features & Benefits

3/Pack Canopy Fittings 1 3/8 Inch High Peak
Designed to form the Ends of the High Peak of a Canopy Frame
Can be used as the Canopy Peak or the Side top pieces
Outer Diameter: 1 1/2 Inner Diameter: 1-3/8 Leg Length: 5
Material: 16 gauge, Galvanized Steel
Canopy Connectors work with 1 3/8' and 1-5/8' chainlink top rail fence pipe

Product Description

Canopy Fittings Frame Kit 1-38 Connectors Couplers Carport Tent Shed 3 Way, 4 Way Set 3Pack 4-Way Gray

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the outer diameter and inner diameter of the canopy fittings?
Answer : The outer diameter is 1-1/2 inches and the inner diameter is 1-3/8 inches
Question : What material are the canopy fittings made of?
Answer : The canopy fittings are made of 16 gauge, Galvanized Steel
Question : What size pipe can the canopy connectors work with?
Answer : The canopy connectors work with 1-3/8' and 1-5/8' chainlink top rail fence pipe
Question : Does this product use seamless pipe? Can the 1 3/8 OD pipe be inserted smoothly?
Answer : No, two pipes are welded together, and some will fit well while others might be tight.
Question : How do you connect the roofing material?
Answer : These are for tarp type coverings, so drape the tarp, tie down at base, and use an exterior crossover rope over the head to hold the tarps in place. Ensure the uprights are firmly attached to the ground and cross brace them to prevent collapsing.
Question : Slant roof 10 leg fittings. The low height will be 5 foot with a 9 foot width. How high should the high side be?
Answer : The highest side should be 6.913 feet. The formula is B = C * Tg12º + A where A is the lowest height, B is the highest height, and C is the width.
Question : What is the maximum span for the high peak connectors?
Answer : It is difficult to determine the maximum span as it depends on the desired height of the side wall.
Question : I have a 20x20 tarp. How much will I lose from the width because of the 120° roof pitch?
Answer : The width of the finished canopy will be approximately 17.3 ft.
Question : Can it be 10 ft. tall and 20 ft. wide?
Answer : Yes, such dimensions are acceptable.
Question : Can I use this for my 20x40 tent?
Answer : This product could serve your intended purpose well, subject to a few structural design considerations. No single pipe segment should exceed 10 ft in length without an intermediate supporting member. The 20-ft width of the structure should be the end width, which will have a peak in the center. These 5 peaks will be installed a maximum 10-ft apart to obtain the desired 40-ft length.
Question : Where would one get the pipes for legs and beams?
Answer : You can purchase them at a fence supply store where they may also cut them to the needed length for you.
Question : Do you have 4-way connectors?
Answer : Yes, they have 4-way connectors for the center of the pen and to add on sections if you want to make the pen longer.
Question : Can you use PVC pipe with these?
Answer : No, PVC pipes cannot be used with these connectors.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

Canopy Fittings Frame Kit 1-38 Connectors Couplers Carport Tent Shed 3 Way, 4 Way Set 3Pack 4-Way Gray

The Canopy Fittings Kit 1-3/8" High Peak Connectors 3 Way, 4 Way Set 3/Pack (4-Way Gray) is an excellent product when it comes to creating a canopy. The fittings are heavy-duty and well-Constructed. The kit has 3-way and 4-way connectors that make it easy to make a canopy for various applications. One thing to Consider is that this kit is not for connecting roofing materials. It is meant for creating a frame to attach tarp type coverings. The user needs to drape the tarp over the frame, tie it down at the base, and use an exterior crossover rope over the head to hold the tarps in place. One needs to ensure that the uprights are firmly attached to the ground and cross-braced to prevent sideways collapse. Customers have used these fittings to make a carport, a canopy for their boat, and even for covering their kayaks. However, these fittings are not suitable for use with PVC pipes. Overall, the Canopy Fittings Kit 1-3/8" High Peak Connectors 3 Way, 4 Way Set 3/Pack (4-Way Gray) is a solid product, and it is worth the price for anyone looking to create a canopy or a carport.

Pros

Heavy-duty and well-Constructed fittings
3-way and 4-way connectors make it easy to create various canopy applications
Works well for carports, boats, kayaks, etc.
Good price for the quality

Cons

Not suitable for connecting roofing materials
Not compatible with PVC pipes

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

Canopy Fittings Frame Kit 1-38 Connectors Couplers Carport Tent Shed 3 Way, 4 Way Set 3Pack 4-Way Gray

View Cart & Checkout