What is the main focus of the manufacturer?

The manufacturer's main focus is on producing rugged, reliable, professional-grade products that are reasonably priced.

What type of products does the manufacturer offer?

The manufacturer offers a diverse range of award-winning products designed with modern technology for powerful devices.

What is the approach of the manufacturer towards their product development process?

The manufacturer is always modernizing their products to meet the demands of the modern user.

What does the DVI adapter do for a motorcycle CDI box?

The DVI adapter will check the peak voltage output to the ignition coil and also check the peak voltage of your stator coil and pick up coil. So while it can't directly check a CDI's functionality, it will allow you to verify everything else is working properly so you can deduce whether the cdi is bad or not bu the process of elimination.

Does the DVI adapter work with digital meters?

Yes it will work with digital meters. Best to have a meter with .00 decimals. It will not work without a meter.

Can the DVI adapter tell you if you have a bad CDI box on a motorcycle?

You plug this into your digital multimeter. It conditions a steady reading and display of the peak voltage of the primary ignition waveform. It can tell you if the cdi box is bad and not capable of required voltages....provided there are manufacturer specs available. This information is normally found in the appropriate repair manuals.

How do you use a direct voltage tester to test for no spark situation on a motorcycle?

Main test is checking ac voltage coming from ipg or hall sensor(crank position sensors)they are located around stator. Need to check voltage why starting unit. Refer to service manual for correct ac voltage output

Will the DVI adapter work with a Fieldpiece meter?

The meter needs to have fast response and a peak hold feature in the volts DC setting.

Will the DVI adapter work with an analog VOM?

The output can be read by any analog meter, but the banana jacks are standard 4mm. If your vom can accept those plugs, you're good. Since all other DVA adapters on here are basically copies of ours, I assume all of them have the same size plugs.

How low a peak voltage can the DVI adapter measure?

I have used it to measure as low as about 20 peak volts. It has worked for rectangular (square wave) pulses and exponential decay pulses.

Does the DVI adapter convert to DC like the CDI units or pass thru the AC?

It allows a DMM to read the peak DC voltage of a primary ignition waveform. A DMM can not sample fast enough to display a usable voltage reading emanating from an ignition waveform. Otherwise, you would need to use an oscilloscope to view and measure the voltage reading.

How long are the leads of the DVI adapter?

The leads are 45 inches long. And the voltage adapter is 2 inch

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/71Z406dlI5L._AC_SL1500_.jpg

ELECTRONIC SPECIALTIES - Leads 640, Factory

Item #:1986607

4.7 rating

Write a review

PKR 15206

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Value-priced, high quality tools - leading the market by ensuring that products are rugged, reliable and reasonably priced.

Product Details

Brand
Power Source
Style
Color
Item Weight

Features & Benefits

High quality and reasonable price.
Rugged and reliable products.
Professional grade products designed with the user in mind.
Modern technology used for powerful devices.
Diverse range of award winning products.
Constantly updated to meet modern needs.

Product Description

ELECTRONIC SPECIALTIES - Leads 640, Factory

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the main focus of the manufacturer?
Answer : The manufacturer's main focus is on producing rugged, reliable, professional-grade products that are reasonably priced.
Question : What type of products does the manufacturer offer?
Answer : The manufacturer offers a diverse range of award-winning products designed with modern technology for powerful devices.
Question : What is the approach of the manufacturer towards their product development process?
Answer : The manufacturer is always modernizing their products to meet the demands of the modern user.
Question : What does the DVI adapter do for a motorcycle CDI box?
Answer : The DVI adapter will check the peak voltage output to the ignition coil and also check the peak voltage of your stator coil and pick up coil. So while it can't directly check a CDI's functionality, it will allow you to verify everything else is working properly so you can deduce whether the cdi is bad or not bu the process of elimination.
Question : Does the DVI adapter work with digital meters?
Answer : Yes it will work with digital meters. Best to have a meter with .00 decimals. It will not work without a meter.
Question : Can the DVI adapter tell you if you have a bad CDI box on a motorcycle?
Answer : You plug this into your digital multimeter. It conditions a steady reading and display of the peak voltage of the primary ignition waveform. It can tell you if the cdi box is bad and not capable of required voltages....provided there are manufacturer specs available. This information is normally found in the appropriate repair manuals.
Question : How do you use a direct voltage tester to test for no spark situation on a motorcycle?
Answer : Main test is checking ac voltage coming from ipg or hall sensor(crank position sensors)they are located around stator. Need to check voltage why starting unit. Refer to service manual for correct ac voltage output
Question : Will the DVI adapter work with a Fieldpiece meter?
Answer : The meter needs to have fast response and a peak hold feature in the volts DC setting.
Question : Will the DVI adapter work with an analog VOM?
Answer : The output can be read by any analog meter, but the banana jacks are standard 4mm. If your vom can accept those plugs, you're good. Since all other DVA adapters on here are basically copies of ours, I assume all of them have the same size plugs.
Question : How low a peak voltage can the DVI adapter measure?
Answer : I have used it to measure as low as about 20 peak volts. It has worked for rectangular (square wave) pulses and exponential decay pulses.
Question : Does the DVI adapter convert to DC like the CDI units or pass thru the AC?
Answer : It allows a DMM to read the peak DC voltage of a primary ignition waveform. A DMM can not sample fast enough to display a usable voltage reading emanating from an ignition waveform. Otherwise, you would need to use an oscilloscope to view and measure the voltage reading.
Question : Can I just connect my digital MM clips to it if the banana clip spacing is wrong for my meter?
Answer : Yes
Question : How long are the leads of the DVI adapter?
Answer : The leads are 45 inches long. And the voltage adapter is 2 inch

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

ELECTRONIC SPECIALTIES - Leads 640, Factory

Electronic Specialties - Leads 640 is a DVA adapter that enables motorcyclists to verify if their ignition coil, stator coil and pick-up coil are providing the appropriate output voltage. Speaking of the CDI functionality, the adapter doesn't detect this component's malfunctions. It's worth mentioning that you need to have a digital multimeter to be able to use Electronic Specialties - Leads 640. In conclusion, this tool is perfect for deducing whether or not the CDI box is bad or if any other output voltage related issues are the culprit.

Pros

Enables motorcyclists to verify the appropriate voltage of ignition coil, stator coil and pick-up coil output
Allows for process of elimination if problem is CDI box related

Cons

Does not directly detect CDI box malfunctions

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

ELECTRONIC SPECIALTIES - Leads 640, Factory

View Cart & Checkout