What is the crimping range of the tool?

The tool can crimp wires ranging from 30-5 AWG (0.08mm²-16mm²)

What is the material used for the crimping die?

The crimping die is made of high-quality carbon steel for durability

Does this tool have a safety release feature?

Yes, it has a built-in ratchet and safety release to minimize terminal loss during crimping

Does it come with any instruction?

Yes, It has the instruction paper attached inside packing, and you can check the bottom of their page, there is a video instruction also.

Will this ones do 6 AWG?

KF-16H square mouth crimping pliers can do 6 AWG, the crimping range of this pliers is 30-5 AWG.

How do you remove a stuck die? Kinda useless if you can't change the die.

Hello, our products will not be stuck, you can buy and use with confidence. And our jaws are also very convenient to replace, you can refer to the video on how to replace it.

Which die works with 10awg butt splice Polyvinyl Chloride terminal?

Jaws 03C can be used to AWG 20-10 insulated nylon termina

Does this crimper works with the common shrink butt connectors that can be purchased from local stores?

Hi, this crimp plier can be used with connectors order from local store, but be careful to check the specs for the specific connector that applies. In addition, our store also has a lot of connectors and terminals to choose from and you can visit it if there is anything you need.

Does the connector slip out when you insert them inside the post or it recommed to hold the wire while crimping?

Connectors hold firmly when inserted into crimper so you can insert wire and crimp connector with no problem...

Can the 04B, 2546 and 35WF be puchased as a add on kit or individualy?

04B and 2546B can be puchased individualy , you can enter our KF CPTEC store to buy it

Does any of the come-with jaw support/crimp MC4 connector?

Yes, our kits have included jaws to crimp MC4 connectors.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

KF CPTEC

KF CPTEC Ferrule Crimper and Front Loading Design Ferrule Crimp Tool with Self-adjusting Ferrule Crimping Tool from 30-5AWG 0.08-16mm² for Wire End Sleeves and Wire End Terminal

Item #:47514852

4.7 rating

Write a review

PKR 15191

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Versatile crimping tool with a range of 30-5 AWG

Product Details

Brand
Color
Item Weight
Handle Material
Grip Type
Country of Origin
Date First Available
What is in the box

Features & Benefits

Crimping tool for end sleeves ferrules wire ends terminals
Features micro adjustment knob for size control
Made of high quality carbon steel for durability
Built in ratchet and safety release for efficient operation
Non slip nylon handle reduces hand strain by 50%
Suitable for a wide range of crimping applications

Product Description

KF CPTEC Ferrule Crimper and Front Loading Design Ferrule Crimp Tool with Self-adjusting Ferrule Crimping Tool from 30-5AWG 0.08-16mm² for Wire End Sleeves and Wire End Terminal

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the crimping range of the tool?
Answer : The tool can crimp wires ranging from 30-5 AWG (0.08mm²-16mm²)
Question : What is the material used for the crimping die?
Answer : The crimping die is made of high-quality carbon steel for durability
Question : Does this tool have a safety release feature?
Answer : Yes, it has a built-in ratchet and safety release to minimize terminal loss during crimping
Question : Does it come with any instruction?
Answer : Yes, It has the instruction paper attached inside packing, and you can check the bottom of their page, there is a video instruction also.
Question : Will this ones do 6 AWG?
Answer : KF-16H square mouth crimping pliers can do 6 AWG, the crimping range of this pliers is 30-5 AWG.
Question : How do you remove a stuck die? Kinda useless if you can't change the die.
Answer : Hello, our products will not be stuck, you can buy and use with confidence. And our jaws are also very convenient to replace, you can refer to the video on how to replace it.
Question : Which die works with 10awg butt splice Polyvinyl Chloride terminal?
Answer : Jaws 03C can be used to AWG 20-10 insulated nylon termina
Question : Does this crimper works with the common shrink butt connectors that can be purchased from local stores?
Answer : Hi, this crimp plier can be used with connectors order from local store, but be careful to check the specs for the specific connector that applies. In addition, our store also has a lot of connectors and terminals to choose from and you can visit it if there is anything you need.
Question : Does the connector slip out when you insert them inside the post or it recommed to hold the wire while crimping?
Answer : Connectors hold firmly when inserted into crimper so you can insert wire and crimp connector with no problem...
Question : Can the 04B, 2546 and 35WF be puchased as a add on kit or individualy?
Answer : 04B and 2546B can be puchased individualy , you can enter our KF CPTEC store to buy it
Question : Does any of the come-with jaw support/crimp MC4 connector?
Answer : Yes, our kits have included jaws to crimp MC4 connectors.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

KF CPTEC Ferrule Crimper and Front Loading Design Ferrule Crimp Tool with Self-adjusting Ferrule Crimping Tool from 30-5AWG 0.08-16mm² for Wire End Sleeves and Wire End Terminal

The KF CPTEC Square Crimping Tool is a 9 piece kit containing a ratchet crimper tool that can crimp ferrules wire ends terminals with an AWG range of 30-5. The ratchet crimping pliers are designed according to human factors engineering and can save up to 50% energy when crimping. The kit also includes a stripper for 22-10AWG wire, which features a pulling jaw and cutting blade, making it perfect for removing the wire sheet without pinching the wire itself. The crimper jaws cover all automotive connector ends, as well as solar and a few others. The jaws are easily replaced with one hand and are held in place by a detent pin action that locks in place in a rail. The ratcheting capability makes setting the wire into the terminal a no-brainer. The KF CPTEC Square Crimping Tool has a professional feel to it, and the parts are well secured in their respective spaces in a foam pack. Overall, the KF CPTEC Square Crimping Tool is a professional quality tool at a great price that could efficiently crimp various wire ends terminals from 30-5 AWG.

Pros

Ratchet crimping pliers designed according to human factors engineering
Can save up to 50% energy when crimping
Stripper has pulling jaw and cutting blade and covers 22-10AWG wire
Crimper jaws cover all automotive connector ends, as well as solar and other connectors
Jaws are easily replaced with one hand
KF CPTEC Square Crimping Tool is a professional quality tool at a great price

Cons

Crimps uneven and deforms ferrules
Reports of a missing die and stripper

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

KF CPTEC Ferrule Crimper and Front Loading Design Ferrule Crimp Tool with Self-adjusting Ferrule Crimping Tool from 30-5AWG 0.08-16mm² for Wire End Sleeves and Wire End Terminal

View Cart & Checkout