What would I need these actuators for?

If your vehicle is throwing a Check Engine Light CEL for codes P0010, P0011, P0013, or P0014 -These actuators located on the cylinder head of your vehicle control the position of the camshafts.

Is this product compatible with all GM vehicles?

No, this product is only compatible with Chevrolet, GMC, Buick, Pontiac, and Saturn Vehicles that have 2.0L, 2.2L or 2.4L engines. Refer to the product description for the list of compatible vehicles.

Is this an Original Equipment Manufacturer (OEM) part?

No, this is not a genuine OEM part. However, each camshaft position solenoid actuator is manufactured to the same specifications as the factory actuators.

Before install, does this require any grease applied? If so, then what kind of grease? If not, then just a dry install is ok?

Hi, you can apply a little lithium grease to the seals on the solenoid spool.

Which is the intake and which is the exhaust?

The gray one is intake part #12655420. The black one is the exhaust part #12655421.

Can this be found at auto parts store?

Hi, I am sorry to inform you but you may need to check it on your local auto parts store if they offer it.

Does this fit my 2009 chevy malibu ls 2.4 L?

Hi, yes this should fit your vehicle.

How soon after changing these parts will my light turn off?

As soon as you either unhook the battery for 30 mins or reset it with a scanner. That’s if the light is on because of those.

Where is this product shipped from?

US Location and it come over night practically.

As I remember about 25ohm or maybe less.

Can this product be returned if it is not needed?

Only if not used or installed I believe. I’d check with the buyer first.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/61rqSqWAnBL._AC_SL1500_.jpg

AA Ignition

Intake and Exhaust Camshaft Position Actuator Solenoid Valve Kit, Replaces 12655420, 12655421, Compatible with Chevy, GMC 2.0, 2.2, 2.4L - HHR, Cobalt,Equinox, Malibu, G6 and other GM Vehicles

Item #:8573672

4.7 rating

Write a review

PKR 15304

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

If your vehicle is throwing a Check Engine Light CEL for codes P0010, P0011, P0013, or P0014 these actuators will fix your problem and restore your vehicle's driveability.

Product Details

Material
Brand
Exterior Finish
Inlet Connection Type
Specification Met
Valve Type
Manufacturer

Features & Benefits

Intake and Exhaust Camshaft Position Actuator Solenoid Valve Kit
Compatible with Chevy, GMC 2.0, 2.2, 2.4L HHR, Cobalt, Equinox, Malibu, G6 and other GM Vehicles.
Replaces Part# Intake Solenoid # 12655420, 12628347, 12646783, 12578517, 12679099, 917215, 917-215, 2T1014 | Exhaust Solenoid # - 12655421, 12628348,12646784,12578518, 12679100, 917216, 917-216, 2T1015.
OEM Fit, Quality, Finish.
Precision machined parts and includes new Viton oil seals for a leak free installation.
NOT a genuine OEM part.

Product Description

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What would I need these actuators for?
Answer : If your vehicle is throwing a Check Engine Light CEL for codes P0010, P0011, P0013, or P0014 -These actuators located on the cylinder head of your vehicle control the position of the camshafts.
Question : Is this product compatible with all GM vehicles?
Answer : No, this product is only compatible with Chevrolet, GMC, Buick, Pontiac, and Saturn Vehicles that have 2.0L, 2.2L or 2.4L engines. Refer to the product description for the list of compatible vehicles.
Question : Is this an Original Equipment Manufacturer (OEM) part?
Answer : No, this is not a genuine OEM part. However, each camshaft position solenoid actuator is manufactured to the same specifications as the factory actuators.
Question : Before install, does this require any grease applied? If so, then what kind of grease? If not, then just a dry install is ok?
Answer : Hi, you can apply a little lithium grease to the seals on the solenoid spool.
Question : Which is the intake and which is the exhaust?
Answer : The gray one is intake part #12655420. The black one is the exhaust part #12655421.
Question : Can this be found at auto parts store?
Answer : Hi, I am sorry to inform you but you may need to check it on your local auto parts store if they offer it.
Question : Does this fit my 2009 chevy malibu ls 2.4 L?
Answer : Hi, yes this should fit your vehicle.
Question : How soon after changing these parts will my light turn off?
Answer : As soon as you either unhook the battery for 30 mins or reset it with a scanner. That’s if the light is on because of those.
Question : Where is this product shipped from?
Answer : US Location and it come over night practically.
Question : How many Ohms?
Answer : As I remember about 25ohm or maybe less.
Question : Can this product be returned if it is not needed?
Answer : Only if not used or installed I believe. I’d check with the buyer first.
Question : Is this the same thing as a variable valve timing (vvt) solenoid?
Answer : Hi, yes its the same.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

Intake and Exhaust Camshaft Position Actuator Solenoid Valve Kit, Replaces 12655420, 12655421, Compatible with Chevy, GMC 2.0, 2.2, 2.4L - HHR, Cobalt,Equinox, Malibu, G6 and other GM Vehicles

The Intake and Exhaust Camshaft Position Actuator Solenoid Valve Kit is a high-quality replacement for OEM parts. It is compatible with various Chevy and GMC vehicles and is easy to install. The product has received positive reviews from customers, with many stating that it fixed their engine issues and improved the performance of their vehicles. However, there have been a few negative reviews mentioning issues with the product failing and codes appearing. Overall, the Intake and Exhaust Camshaft Position Actuator Solenoid Valve Kit is recommended for its quality and compatibility.

Pros

High-quality replacement for OEM parts
Easy to install
Fixed engine issues for many customers
Improved vehicle performance

Cons

Some reports of the product failing
Codes appearing for a few customers

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

Intake and Exhaust Camshaft Position Actuator Solenoid Valve Kit, Replaces 12655420, 12655421, Compatible with Chevy, GMC 2.0, 2.2, 2.4L - HHR, Cobalt,Equinox, Malibu, G6 and other GM Vehicles

View Cart & Checkout