What is the maximum distance supported with 4K signal?

Up to 115 feet with Cat6/7 cable

Does it support audio formats other than HDMI audio?

Yes, it supports Coaxial and Analog audio formats

Is the setup complicated?

No, it is a plug and play setup without any software installation

Will this support 2 outputs at 4k and 2 outputs at 1080p?

If any one of the outputs is 1080p, then all connected displays will receive a 1080p signal.

Will the main device join your network and allow you to navigate to the IP address to control the device?

No, this device does not have LAN support and does not work over IP.

I have 4 HDTVs from 1 source device, 2@450ft and 2@300ft, will all my ports broadcast in 1080p or will it broadcast both 1080p and 4k at the same time?

This extender splitter supports 1080p up to 500ft and 4k up to 400ft. It will output the same resolution on all TVs at a time.

How low is the latency?

The latency is close to 0 since it uses HDBaseT transmission.

Will this product support CAT8 cable?

Yes, it works with CAT8. The manufacturer has tested it with CAT6 and 5e cables and there was no noticeable difference.

Can I purchase the Sender unit only?

Yes, you can purchase the sender unit separately from the manufacturer.

Does the package include AC adapters for the receivers?

No, the receivers do not require power adapters as they support PoC (Power over Cable) function.

I want to connect to one 4k monitor and 6 1080 monitors. Will this unit default to 1080p once a 1080 monitor is connected?

Yes, all of the outputs will receive a 1080p signal.

Would love to have some brackets for this to mount it in my rack?

Unfortunately, there are no specific brackets available for this product. However, you can create your own brackets using aluminum sheet material.

Does the HDMI Loop Out on the transmitter only transmit video or does it also transmit audio via the same HDMI cable?

Yes, the HDMI output and Cat6 outputs both support audio and video signals.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

OREI

OREI 1x2 HDMI Extender Splitter 4K by Multiple Over Single Cable CAT67 4K@60Hz 4:4:4 HDCP 2.2 with IR Remote EDID Management - Up to 115 Ft - Loop Out - Low Latency - Full Support

Item #:32065141

4.7 rating

Write a review

PKR 70135

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Distribute 4K 1 HDMI source to 2 HDMI displays over Cat6/7/8 Network Cable Simultaneously

Product Details

Product Dimensions
Item Weight
ASIN
Item model number
Date First Available
Manufacturer
Connector Type
Brand
Compatible Devices
Cable Type
Number of Ports

Product Description

OREI 1x2 HDMI Extender Splitter 4K by Multiple Over Single Cable CAT67 4K@60Hz 4:4:4 HDCP 2.2 with IR Remote EDID Management - Up to 115 Ft - Loop Out - Low Latency - Full Support

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the maximum distance supported with 4K signal?
Answer : Up to 115 feet with Cat6/7 cable
Question : Does it support audio formats other than HDMI audio?
Answer : Yes, it supports Coaxial and Analog audio formats
Question : Is the setup complicated?
Answer : No, it is a plug and play setup without any software installation
Question : Will this support 2 outputs at 4k and 2 outputs at 1080p?
Answer : If any one of the outputs is 1080p, then all connected displays will receive a 1080p signal.
Question : Will the main device join your network and allow you to navigate to the IP address to control the device?
Answer : No, this device does not have LAN support and does not work over IP.
Question : I have 4 HDTVs from 1 source device, 2@450ft and 2@300ft, will all my ports broadcast in 1080p or will it broadcast both 1080p and 4k at the same time?
Answer : This extender splitter supports 1080p up to 500ft and 4k up to 400ft. It will output the same resolution on all TVs at a time.
Question : How low is the latency?
Answer : The latency is close to 0 since it uses HDBaseT transmission.
Question : Will this product support CAT8 cable?
Answer : Yes, it works with CAT8. The manufacturer has tested it with CAT6 and 5e cables and there was no noticeable difference.
Question : Can I purchase the Sender unit only?
Answer : Yes, you can purchase the sender unit separately from the manufacturer.
Question : Does the package include AC adapters for the receivers?
Answer : No, the receivers do not require power adapters as they support PoC (Power over Cable) function.
Question : I want to connect to one 4k monitor and 6 1080 monitors. Will this unit default to 1080p once a 1080 monitor is connected?
Answer : Yes, all of the outputs will receive a 1080p signal.
Question : Would love to have some brackets for this to mount it in my rack?
Answer : Unfortunately, there are no specific brackets available for this product. However, you can create your own brackets using aluminum sheet material.
Question : Does the HDMI Loop Out on the transmitter only transmit video or does it also transmit audio via the same HDMI cable?
Answer : Yes, the HDMI output and Cat6 outputs both support audio and video signals.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

OREI 1x2 HDMI Extender Splitter 4K by Multiple Over Single Cable CAT67 4K@60Hz 4:4:4 HDCP 2.2 with IR Remote EDID Management - Up to 115 Ft - Loop Out - Low Latency - Full Support

The product can transmit audio and video signals only and not ethernet. It works with cat5e or cat6 and requires point-to-point cat cable connection. The maximum distance is reduced to 300 feet with cat5e cable. The IR signal from the displays can be sent back to the transmitter using a separate cable. The hdmi output on the receiver is for both audio and video. The product can be used with a live video feed as long as it has an HDMI output from the camera system. Overall, customers are satisfied with the product, citing its ease of use and high-quality transmission. Some customers have complained about noise interference when the device is close to other electronics, while others have experienced signal dropouts at long distances.

Pros

Easy to use
High-quality transmission
Can be used for live video feed

Cons

Noise interference when device is close to other electronics
Signal dropouts at long distances

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

OREI 1x2 HDMI Extender Splitter 4K by Multiple Over Single Cable CAT67 4K@60Hz 4:4:4 HDCP 2.2 with IR Remote EDID Management - Up to 115 Ft - Loop Out - Low Latency - Full Support

View Cart & Checkout