What is the recommended wire gauge for this fuse holder?

The wire terminals are best suited for connecting to 8 gauge wires.

What is the current rating of the included fuses?

Two 60A AGU fuses are included.

Is this fuse holder suitable for automotive use?

Yes, it is moisture resistant and slightly waterproof, making it ideal for automotive use.

Will this work for 4 gauge wire?

Yes, it will work for either 8 gauge wire with the red insert or 4 gauge wire without the red insert.

Is this only rated for 60Amps?

No, this AGU fuse holder can handle more than 60 amps. It can accommodate the size of the fuse used.

What would be the difference in replacing the fuses with nickel plated ones? Using on 500A inverter in car to starter battery about 10ft 6AWG wire.

There would be no difference in replacing the fuses with nickel plated ones. The fuse block is designed to hold from 4 gauge wire to 8 gauge, which would be suitable for your setup.

Is this a crimp style connection to the wire? Do you use wire crimp pliers to crimp the wire in each end of the fuse holder?

No, the fuse holder itself has set screws on each side. You unscrew the set screws enough to insert the wire, then tighten them down. The connection on the other side of the wire is up to you.

Will this work with 6 gauge wire?

Yes, it is designed to work with wire sizes ranging from 4 to 8 gauge.

Is it necessary to install one of these if I want to connect a 500W pure sine wave inverter to my Kia Optima starter battery using 6AWG wire that is 10ft long?

Yes, it is necessary for safety reasons. A ground-out fuse can blow and prevent the car from catching fire.

What size Allen wrench is needed for installation?

It is suggested to use a 5mm Allen wrench for installation, but please verify with the product manufacturer for the exact size.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/61etAlsYMJL._AC_SL1300_.jpg

Carviya

in-line AGU Fuse Holder for 4-10 Gauge AWG Wire 6 Gauge & 8 Gaugewith Two 60A AGU Fuses for Car AudioAlarmAmplifierCompressorsAuto PartsAutomotiveMarineIndustrial 60Amp, 1 Pack

Item #:41497992

4.7 rating

Write a review

PKR 4735

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Ideal for custom protection circuits or to replace an existing defective one.

Product Details

AC Adapter Current
Brand
Voltage
Material
Mounting Type

Product Description

in-line AGU Fuse Holder for 4-10 Gauge AWG Wire 6 Gauge & 8 Gaugewith Two 60A AGU Fuses for Car AudioAlarmAmplifierCompressorsAuto PartsAutomotiveMarineIndustrial 60Amp, 1 Pack

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the recommended wire gauge for this fuse holder?
Answer : The wire terminals are best suited for connecting to 8 gauge wires.
Question : What is the current rating of the included fuses?
Answer : Two 60A AGU fuses are included.
Question : Is this fuse holder suitable for automotive use?
Answer : Yes, it is moisture resistant and slightly waterproof, making it ideal for automotive use.
Question : Will this work for 4 gauge wire?
Answer : Yes, it will work for either 8 gauge wire with the red insert or 4 gauge wire without the red insert.
Question : Is this only rated for 60Amps?
Answer : No, this AGU fuse holder can handle more than 60 amps. It can accommodate the size of the fuse used.
Question : What would be the difference in replacing the fuses with nickel plated ones? Using on 500A inverter in car to starter battery about 10ft 6AWG wire.
Answer : There would be no difference in replacing the fuses with nickel plated ones. The fuse block is designed to hold from 4 gauge wire to 8 gauge, which would be suitable for your setup.
Question : Is this a crimp style connection to the wire? Do you use wire crimp pliers to crimp the wire in each end of the fuse holder?
Answer : No, the fuse holder itself has set screws on each side. You unscrew the set screws enough to insert the wire, then tighten them down. The connection on the other side of the wire is up to you.
Question : Will this work with 6 gauge wire?
Answer : Yes, it is designed to work with wire sizes ranging from 4 to 8 gauge.
Question : Is it necessary to install one of these if I want to connect a 500W pure sine wave inverter to my Kia Optima starter battery using 6AWG wire that is 10ft long?
Answer : Yes, it is necessary for safety reasons. A ground-out fuse can blow and prevent the car from catching fire.
Question : What size Allen wrench is needed for installation?
Answer : It is suggested to use a 5mm Allen wrench for installation, but please verify with the product manufacturer for the exact size.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

in-line AGU Fuse Holder for 4-10 Gauge AWG Wire 6 Gauge & 8 Gaugewith Two 60A AGU Fuses for Car AudioAlarmAmplifierCompressorsAuto PartsAutomotiveMarineIndustrial 60Amp, 1 Pack

The Carviya 4-8 Gauge AWG in-line Waterproof Fuse Holder is a sturdy, well-built product that adds a layer of safety and convenience to any car audio system. It comes with two 60A AGU type fuses, and the holder can accommodate up to 100A, depending on the size of the fuse used. The holder is waterproof, which makes it perfect for marine applications, and its red insert enables it to handle both 8 gauge and 4 gauge wires without any issues. Overall, the Carviya 4-8 Gauge AWG in-line Waterproof Fuse Holder is a great value for its price, and it works well with a range of different wire gauges. Customers seem to be happy with their purchases, although there have been some issues with the fuse itself breaking or coming unglued. Users are advised to inspect the fuses carefully before installing them to avoid any power issues.

Pros

Sturdy and well-built
Waterproof design
Can accommodate up to 100A
Works with both 8 gauge and 4 gauge wires

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

in-line AGU Fuse Holder for 4-10 Gauge AWG Wire 6 Gauge & 8 Gaugewith Two 60A AGU Fuses for Car AudioAlarmAmplifierCompressorsAuto PartsAutomotiveMarineIndustrial 60Amp, 1 Pack

View Cart & Checkout