What is the range of the wireless transmission?

Up to 100 ft (30M) operational distance between transmitter and receiver (line of sight).

Does it support high-quality audio without compression?

Yes, it provides premium-quality standard audio line level output digital format without audio compression.

Is there any delay in audio transmission?

Using the WSA-5TR-V2 eliminates delays between audio and the film, providing faster and more stable sound quality.

Can this product be used with front center side or rear speakers?

It only works with powered/active speakers or subwoofers. If you have passive speakers, you'll need a mini power amplifier connected between the wireless receiver and speakers.

Do I need one receiver per speaker if I want to connect six speakers wirelessly to my stereo receiver?

No, you can use one transmitter and receiver set to power two separate speakers in a stereo configuration.

How can I replace RCA with these wireless transmitters and receivers in my Nakamichi 9.2 system?

These are 2-channel devices, so you would need 2 sets of transmitters and receivers to replace RCA connections for two pairs of sub speakers.

Can two of these units be used for rear surround speakers?

Yes, but keep in mind that the wireless receiver doesn't have an amplifier built-in, so your rear surround speakers must be active/powered. Alternatively, you can consider the WSA-5RP model for passive rear surround speakers.

Has anyone successfully used this with Google Nest Mesh WiFi?

Yes, some users have reported successful use with Google WiFi mesh networks without any problems.

Do the transmitter input and receiver output levels lead to signal clipping?

No, when the external audio device sends 0.7 Vrms to the transmitter, the wireless receiver will also provide 0.7 Vrms output without any gain boost or decrease. The maximum audio input/output level can be 2V.

Can someone recommend a line output converter for use with an Onkyo TX-NR7100 for rear surrounds?

Any stripped wire to RCA adapter should work. Search for 'RCA to wire converter' on Amazon or Radio Shack for options.

If I plug this into my active subwoofer, will the subwoofer continue to be on 24/7?

It should be transparent to the subwoofer, and it will continue to receive the same signal as in the wired line. You can try it to be sure.

Why can't this product transmit frequencies under 10Hz?

The subwoofer range is typically in the 20Hz range, so there isn't usually a need to transmit frequencies lower than that.

For a rear surround 2 speaker setup, how do I plug an A/V receiver for both channels?

You will possibly need 2 sets of transmitters and receivers. Contact the company for more specific information or clarification based on your setup.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/71COdZgNysL._AC_SL1500_.jpg

DYNASTY PROAUDIO

WSA-5TR-V2 Wireless Subwoofer Speaker Kit, 5.2G 5.8GHz Dual Band Selectable, Total 106 RF Channel Auto Switching

Item #:33782872

4.7 rating

Write a review

PKR 44680

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Using the WSA-5TR-V2 would be no delays between audio and the film, and provide faster, more stable, better sound quality, latency reducing and less traffic.

Product Details

Features & Benefits

Latest wireless audio technology
Dual band selectable for low interference
Quick and easy installation
High wireless transmission performance
Premium audio output
Wide transmission range

Product Description

WSA-5TR-V2 Wireless Subwoofer Speaker Kit, 5.2G 5.8GHz Dual Band Selectable, Total 106 RF Channel Auto Switching

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the range of the wireless transmission?
Answer : Up to 100 ft (30M) operational distance between transmitter and receiver (line of sight).
Question : Does it support high-quality audio without compression?
Answer : Yes, it provides premium-quality standard audio line level output digital format without audio compression.
Question : Is there any delay in audio transmission?
Answer : Using the WSA-5TR-V2 eliminates delays between audio and the film, providing faster and more stable sound quality.
Question : Can this product be used with front center side or rear speakers?
Answer : It only works with powered/active speakers or subwoofers. If you have passive speakers, you'll need a mini power amplifier connected between the wireless receiver and speakers.
Question : Do I need one receiver per speaker if I want to connect six speakers wirelessly to my stereo receiver?
Answer : No, you can use one transmitter and receiver set to power two separate speakers in a stereo configuration.
Question : How can I replace RCA with these wireless transmitters and receivers in my Nakamichi 9.2 system?
Answer : These are 2-channel devices, so you would need 2 sets of transmitters and receivers to replace RCA connections for two pairs of sub speakers.
Question : Can two of these units be used for rear surround speakers?
Answer : Yes, but keep in mind that the wireless receiver doesn't have an amplifier built-in, so your rear surround speakers must be active/powered. Alternatively, you can consider the WSA-5RP model for passive rear surround speakers.
Question : Has anyone successfully used this with Google Nest Mesh WiFi?
Answer : Yes, some users have reported successful use with Google WiFi mesh networks without any problems.
Question : Do the transmitter input and receiver output levels lead to signal clipping?
Answer : No, when the external audio device sends 0.7 Vrms to the transmitter, the wireless receiver will also provide 0.7 Vrms output without any gain boost or decrease. The maximum audio input/output level can be 2V.
Question : Can someone recommend a line output converter for use with an Onkyo TX-NR7100 for rear surrounds?
Answer : Any stripped wire to RCA adapter should work. Search for 'RCA to wire converter' on Amazon or Radio Shack for options.
Question : If I plug this into my active subwoofer, will the subwoofer continue to be on 24/7?
Answer : It should be transparent to the subwoofer, and it will continue to receive the same signal as in the wired line. You can try it to be sure.
Question : Why can't this product transmit frequencies under 10Hz?
Answer : The subwoofer range is typically in the 20Hz range, so there isn't usually a need to transmit frequencies lower than that.
Question : For a rear surround 2 speaker setup, how do I plug an A/V receiver for both channels?
Answer : You will possibly need 2 sets of transmitters and receivers. Contact the company for more specific information or clarification based on your setup.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

WSA-5TR-V2 Wireless Subwoofer Speaker Kit, 5.2G 5.8GHz Dual Band Selectable, Total 106 RF Channel Auto Switching

The DYNASTY PROAUDIO WSA-5TR is a wireless transmitter and receiver set for powered/active speakers or subwoofers. It works by transmitting audio wirelessly between your audio source and your speaker, eliminating the need for annoying wires. It is ideal for people who hate dealing with wires and want more flexibility when positioning their speakers or subwoofers. The setup is easy and the data transfer is reliable. The set is dual 5.2/5.8GHz and allows you to choose which frequency to use. The device is strong and doesn't affect the wifi system. If you want to use this device, ensure that you test which frequency does not affect your wifi and apply that to both the transmitter and receiver. WSA-5TR does not have a power on/off switch but still works with power input switching. The device has a one-year warranty. The device works flawlessly and takes three seconds to pair. The connection is so reliable you can't tell it's not wired. The device moved the sub to the rear of the room, making it more useful. Consumers who used SVS brand previously are highly amazed by the WSA-5TR range of connection. It is recommended that the further you move the input and output boxes, the higher the chance of interference with the Bluetooth signal.

Pros

Dual 5.2/5.8GHz allows you to choose which frequency to use
Reliable data transfer
Works flawlessly with no noticeable delay
Easy to set up and operate
Stable and strong
Offers flexibility when positioning speakers or subwoofers

Cons

Doesn't work with passive speakers
No power on/off switch
Dodgy RCA cables provided

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

WSA-5TR-V2 Wireless Subwoofer Speaker Kit, 5.2G 5.8GHz Dual Band Selectable, Total 106 RF Channel Auto Switching

View Cart & Checkout