Is the silicone material used in the making of this kit safe and flexible?

Yes, the silicone material used is of high quality, non-toxic, odorless and flexible.

Can this kit be used for making food molds?

No, this kit is not for making food mold use.

Are there any specific chemicals that can inhibit the curing process while using this kit?

Yes, sulphur is one of the chemicals that can inhibit the curing process. It is advised not to use sulphur plasticine clay.

How much molding material would I need for a 2.5 inch diameter and 3/4 inch thick round item?

The best way to know the exact amount of mold maker you need is to fill a suitable container with water with the item you want to mold in it, and measure the water. This will give you the approximate amount of molding material you need. It's recommended to make a little extra in case.

Can I make wedding bands with this product?

For small items like rings and other jewelry, 30A silicone should be used for the mold. You may also use 20A, but ensure the mold is not too thin. This product is 15A.

Can the molds be used in an oven for baking clay?

This product has been used with a torch, but it is not food grade, make sure to avoid making molds that have contact with food and household items. It is not confirmed whether it can be baked in the oven.

Is this a tin-cure or platinum-cure silicone?

While not confirmed, most 1:1 silicone mixes are platinum cure. It can be accelerated with heat (platinum cure), or moisture (tin cure). This product is probably platinum-cure silicone.

Is the mold resistant to ethanol/alcohol after being dry?

Yes, the product is resistant to ethanol/alcohol after it dries.

Can this product be used to create a mold for concrete?

This product may be too expensive and soft/squishy for something as heavy and large as concrete. It is recommended to use brush-on latex or silicone for detail layers, and fiberglass for a rigid backing for concrete molds.

What is the shore hardness of the silicone, and is it soft like Jello?

The shore hardness depends on how careful you measure, but it is usually between extremes. It feels like a silicone pot holder, softer than a dog chew toy but harder than a stretchy sticky kid's toy. It is in between these extremes, but it varies with measurements.

What is the hardness of the silicone?

The hardness of this product's silicone is 30.

Can I use this product to make an adult toy?

The product can be used for adult toys, but there are better options specifically designed for that purpose.

What is the working temperature for the cured mold? Can it withstand 450-600F for lead castings?

The product can be used for low melt alloys that are lead-free. It can withstand a temperature of up to 200C, which is slightly above 400 F. The product's silicone has been tested with a bizmuth alloy at 281F.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/51aZTOU-7pL._AC_SL1001_.jpg

Miraclekoo

Silicone Mold Making Kit Liquid Silicone Rubber 15A Platinum Silicone Translucent Mold Making Silicone for Casting Resin Molds, Silicone Molds 7 oz

Item #:17917877

4.7 rating

Write a review

PKR 5322

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Miraclekoo Silicone Mold Making Kit is safe, easy to use, and perfect to make different molds such as resin molds, candle molds, and casting molds.

Product Details

Features & Benefits

Easy to use, no special skills or tools required
Safe, high quality, non-toxic and odorless silicone material used
Self debubbling and can also be accelerated or slowed down as per need
Versatile, perfect for making different molds
Note: not suitable for food mold use or mixing without using silicon based products
Certain chemicals such as sulphur can inhibit the curing process

Product Description

Silicone Mold Making Kit Liquid Silicone Rubber 15A Platinum Silicone Translucent Mold Making Silicone for Casting Resin Molds, Silicone Molds 7 oz

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : Is the silicone material used in the making of this kit safe and flexible?
Answer : Yes, the silicone material used is of high quality, non-toxic, odorless and flexible.
Question : Can this kit be used for making food molds?
Answer : No, this kit is not for making food mold use.
Question : Are there any specific chemicals that can inhibit the curing process while using this kit?
Answer : Yes, sulphur is one of the chemicals that can inhibit the curing process. It is advised not to use sulphur plasticine clay.
Question : How much molding material would I need for a 2.5 inch diameter and 3/4 inch thick round item?
Answer : The best way to know the exact amount of mold maker you need is to fill a suitable container with water with the item you want to mold in it, and measure the water. This will give you the approximate amount of molding material you need. It's recommended to make a little extra in case.
Question : Can I make wedding bands with this product?
Answer : For small items like rings and other jewelry, 30A silicone should be used for the mold. You may also use 20A, but ensure the mold is not too thin. This product is 15A.
Question : Can the molds be used in an oven for baking clay?
Answer : This product has been used with a torch, but it is not food grade, make sure to avoid making molds that have contact with food and household items. It is not confirmed whether it can be baked in the oven.
Question : Is this a tin-cure or platinum-cure silicone?
Answer : While not confirmed, most 1:1 silicone mixes are platinum cure. It can be accelerated with heat (platinum cure), or moisture (tin cure). This product is probably platinum-cure silicone.
Question : Is the mold resistant to ethanol/alcohol after being dry?
Answer : Yes, the product is resistant to ethanol/alcohol after it dries.
Question : Can this product be used to create a mold for concrete?
Answer : This product may be too expensive and soft/squishy for something as heavy and large as concrete. It is recommended to use brush-on latex or silicone for detail layers, and fiberglass for a rigid backing for concrete molds.
Question : What is the shore hardness of the silicone, and is it soft like Jello?
Answer : The shore hardness depends on how careful you measure, but it is usually between extremes. It feels like a silicone pot holder, softer than a dog chew toy but harder than a stretchy sticky kid's toy. It is in between these extremes, but it varies with measurements.
Question : What is the hardness of the silicone?
Answer : The hardness of this product's silicone is 30.
Question : Can I use this product to make an adult toy?
Answer : The product can be used for adult toys, but there are better options specifically designed for that purpose.
Question : What is the working temperature for the cured mold? Can it withstand 450-600F for lead castings?
Answer : The product can be used for low melt alloys that are lead-free. It can withstand a temperature of up to 200C, which is slightly above 400 F. The product's silicone has been tested with a bizmuth alloy at 281F.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

Silicone Mold Making Kit Liquid Silicone Rubber 15A Platinum Silicone Translucent Mold Making Silicone for Casting Resin Molds, Silicone Molds 7 oz

This is a silicone mold making material with a shore hardness of 30. It is suitable for making small molds, lead-free low melt alloys, and grips for various objects. However, some customers have complained that it reacts badly with some materials like petroleum jelly and UV resin. They've also expressed concerns that the material does not cure properly and leaves a sticky, tacky finish on their molds. Others have suggested using non-sulphur plasticine to avoid this problem. The mixing process is critical, and it is necessary to measure precisely and stir for five minutes. The product is suitable for creating molds for anything, but it is not the best choice for concrete. It's also suitable for making adult toys, but there are better products on the market. Once cured, the molds are resistant to alcohol and ethanol. The heat rating of the cured mold is around 200C, which makes it suitable for use with a bizmuth alloy. The product can withstand 300F in the oven. As per the reviews, the product is suitable for newbies starting with mold making. However, it's not recommended for experienced users because of its limitations.

Pros

Easy to use
Detail capture is excellent
Suitable for newbies
Can withstand up to 300F in the oven
Makes a soft and durable mold

Cons

Can be tricky to mix and measure
Does not work well with some materials
Leaves a tacky, sticky finish on the molds
Unsuitable for making molds of large or heavy items like concrete.

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

Silicone Mold Making Kit Liquid Silicone Rubber 15A Platinum Silicone Translucent Mold Making Silicone for Casting Resin Molds, Silicone Molds 7 oz

View Cart & Checkout