hansgrohe 96339000 Joystick Cartridge, Small, Chrome

The hansgrohe 96339000 Joystick Cartridge is a reliable and effective replacement part for the Axor Cittorio faucet. Customers have reported that the cartridge fixed the issue of water leaking from the base of the handle and restored smooth movement to the joystick handle. The cartridge kit includes instructions for various faucet models, including the Cittorio. However, customers have mentioned that the tool provided in the kit was not suitable for the Cittorio and that a 1 1/32" deep hex socket is needed to remove the cartridge. Some customers ended up purchasing a separate shower valve socket set to obtain the necessary socket. The kit also includes a packet of silicone grease, which should be applied to all o-rings and rubber seals during installation. Some customers were unaware that the grease was included and had already purchased it separately. Removing the handle and replacing the cartridge can be a bit tricky. Customers have advised using a 2.5 mm allen wrench to remove the set screw on the back of the handle. The handle may require some prying to remove, and a small screwdriver can be used for this. The ring at the base of the handle is held in place by an o-ring and may require gentle prying to lift. A pair of tweezers or needle nose pliers are needed to remove the small rubber thingies and springs from the old cartridge and replace them with the ones supplied in the kit. Seating the rubber thingies properly may require some wiggling. The cartridge should be installed with the included o-ring, and silicone grease should be applied to extend its life. Overall, the hansgrohe 96339000 Joystick Cartridge is a good replacement option for the Axor Cittorio faucet, but customers may encounter some difficulties during the installation process. It is recommended to have the necessary tools, such as a 1 1/32" deep hex socket and a 2.5 mm allen wrench, on hand.