Can this adhesive be used on different types of fabric?

Yes, it can be used on various fabrics.

Yes, it is easy to apply by simply spraying onto the fabric.

Can it be used for both no-sew and sewing projects?

Yes, it can be used for both types of projects.

How does this hold up after repeated washes?

I found it to hold up well; however, I washed it in the gentle cycle with warm water setting. With gentle care, it will hold up well enough for regular use.

How to remove residue?

Place a cotton cloth over the residue and iron over it.

Can this be used to bond an elastic waistband to a cotton garment?

You would have to pretest it to see if it would be successful. Sewing through the adhesive for extra support when stretched is recommended.

Is there any way to remove the appliqué residue after it is affixed to an item?

Repeatedly go over it with an iron and scrap material to melt it off. It may take a while.

Will this permanently hold cotton and leather together without peeling up?

No, it is not recommended for that purpose.

Would this work on sublimation, for example with sublimating socks?

No, SpraynBond Fusible is not meant for sublimation projects. It is designed for fabric projects like quilting, sewing, and embroidery.

Can it be used to stick patches on leather?

It should work as it is intended for fabric projects. Pretesting a sample piece of cloth patch and leather is recommended.

Can it be used to stick patches on denim?

Yes, it can be used to stick a patch to denim. Apply a thick coating of spray, then iron from both sides.

Would this affix satin ribbon to curtains?

It is very sticky and hard to control placement. If you are covering the entire back of the ribbon and laying it straight on the curtains, it will probably work fine. If you need to adjust placement, Heat n' Bond iron-on fusible web is recommended instead. Spray outside on paper to avoid stickiness getting everywhere.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

HeatnBond

HeatnBond SpraynBond Fusible Adhesive Spray, 6.9 OZ 195 g

Item #:3158597

4.7 rating

Write a review

PKR 6693

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Spray n Bond Fusible Adhesive is a iron-on, no sew adhesive for fabric.

Product Details

Brand
Compatible Material
Item Form
Special Feature
Color
Item Package Quantity
Package Information
Item Volume
Product Dimensions
Item model number
ASIN
Is Discontinued By Manufacturer
Item Weight
Manufacturer
Date First Available
Brand
Compatible Material
Item Form
Special Feature
Color
Country of Origin
What is in the box

Features & Benefits

Iron on, no sew adhesive for fabric
Can be used for applique pieces, home decor, costuming and crafts
Ensures even coverage and strong bond
Can be used for both no sew and sewing projects
Great for fabric sculpting and mixed media

Product Description

HeatnBond SpraynBond Fusible Adhesive Spray, 6.9 OZ 195 g

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : Can this adhesive be used on different types of fabric?
Answer : Yes, it can be used on various fabrics.
Question : Is it easy to apply?
Answer : Yes, it is easy to apply by simply spraying onto the fabric.
Question : Can it be used for both no-sew and sewing projects?
Answer : Yes, it can be used for both types of projects.
Question : How does this hold up after repeated washes?
Answer : I found it to hold up well; however, I washed it in the gentle cycle with warm water setting. With gentle care, it will hold up well enough for regular use.
Question : How to remove residue?
Answer : Place a cotton cloth over the residue and iron over it.
Question : Can this be used to bond an elastic waistband to a cotton garment?
Answer : You would have to pretest it to see if it would be successful. Sewing through the adhesive for extra support when stretched is recommended.
Question : Is there any way to remove the appliqué residue after it is affixed to an item?
Answer : Repeatedly go over it with an iron and scrap material to melt it off. It may take a while.
Question : Will this permanently hold cotton and leather together without peeling up?
Answer : No, it is not recommended for that purpose.
Question : Would this work on sublimation, for example with sublimating socks?
Answer : No, SpraynBond Fusible is not meant for sublimation projects. It is designed for fabric projects like quilting, sewing, and embroidery.
Question : Can it be used to stick patches on leather?
Answer : It should work as it is intended for fabric projects. Pretesting a sample piece of cloth patch and leather is recommended.
Question : Can it be used to stick patches on denim?
Answer : Yes, it can be used to stick a patch to denim. Apply a thick coating of spray, then iron from both sides.
Question : Would this affix satin ribbon to curtains?
Answer : It is very sticky and hard to control placement. If you are covering the entire back of the ribbon and laying it straight on the curtains, it will probably work fine. If you need to adjust placement, Heat n' Bond iron-on fusible web is recommended instead. Spray outside on paper to avoid stickiness getting everywhere.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

HeatnBond SpraynBond Fusible Adhesive Spray, 6.9 OZ 195 g

The HeatnBond SpraynBond Fusible Adhesive Spray offers convenience for fabric projects such as quilting, sewing, and embroidery. It holds up well with gentle care and washing in the gentle cycle with warm water setting. However, it may not provide the same longevity as sewing. The residue can be removed by placing a cotton cloth over it and ironing. Pretesting is recommended for bonding an elastic waistband to a cotton garment, and sewing through the adhesive for extra support may be necessary. It is not recommended for permanent bonding of cotton and leather. It has not been tested for sublimation projects. For affixing patches on denim, a thick coating of spray and ironing from both sides is recommended. It may work for affixing satin ribbon to curtains, but controlling the placement can be challenging, and Heat n' Bond iron-on fusible web is recommended instead.

Pros

Convenient for fabric projects
Good for keeping quilting fabric together
Works well for attaching stabilizer temporarily to embroidery fabric
Easy to use
Holds up well with gentle care

Cons

May not provide the same longevity as sewing
Residue may be difficult to remove
Not recommended for permanent bonding of cotton and leather
Not tested for sublimation projects
Requires pretesting for specific fabric combinations
Placement control can be challenging for affixing satin ribbon to curtains

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

HeatnBond SpraynBond Fusible Adhesive Spray, 6.9 OZ 195 g

View Cart & Checkout