What is XPEL Ceramic Boost?

XPEL Ceramic Boost is a product that seals the surface of your film and paint with a micro-thin layer of protection, while repelling dust and lint. It helps resist debris, scratches, and contaminates.

What are the benefits of using XPEL Ceramic Boost?

XPEL Ceramic Boost makes your surface slick, increases shine, and helps repel dust and lint. It can be used with XPEL FUSION PLUS, or as a standalone sealant.

Where is XPEL Ceramic Boost made?

XPEL Ceramic Boost is made in the USA.

Trying to maintain the satin finish of xpel stealth coated with ceramic pro and not add too much shine. only cg meticulous matte, or will this work?

All these boost products protect the existing finish as it is, whether it's matt or high gloss, all they do is provide a hydrophobic layer on top of your finish. They do not add any additional shine to your finish, they just accentuate what you already have, you need to have a very clean surface when you apply these products...

What's the difference between ceramic boost spray and the xpel sealant?

The Ceramic Boost product is meant to be applied on top of ceramic coated paint surfaces. It refreshes the slick super smooth feeling of the surface allowing surface dirt like bird poop, splattered bugs, and road tar to wipe off a lot easier. The boost spray can be applied to any painted surface, but I'm not sure it offers much additional protection to non-ceramic coated surfaces.

Does your vehicle have to be ceramic coated to use this product?

Yes, but your question is very valid for the next iteration of this product, ceramic waxes. If you are not blessed with a ceramic coat, use Griot’s spray on wax…. But if you have such a coating, this product is excellent

Is this safe to use on black trim or do I need to make sure it only goes on painted surfaces?

The bottle does not warn about using the product on non-painted surfaces, so it would probably work fine. But, there are plenty of better and cheaper products for protecting plastic and rubber trim.

What is the approximate longevity if used solo?

Hard to say, but probably similar to other spray-on ceramic detail sprays. I'd say a month or two depending on the conditions. I only use it on the Xpel PPF, but there's no reason you can't use it on the entire car. Beads nicely and slick finish.

Hi, should I first wax the car and then apply Ceramic boost? Thank u

My car is ceramic coated so I just use the boost periodically. Not sure what it will do if it is just waxed.

What percentage of this product is infused with sio2 ceramic coating?

Hard to say, I imagine it would be proprietary for XPEL, it works very well and is super slick

What type of material should I use to apply this product?

I would use an edgeless microfiber towel.

I just wrapped my vehicle in matte and applied xpel fusion plus ceramic coat. How long should I wait before using this and how often should I use it?

I had mine done about 3 months ago and the XPEL dealer told me to wait 10-12 days before washing it and applying this spray. Now, I wash the car every other weekend and I apply this spray at that time, every other weekend.

Will this add unwanted gloss to a matte finish?

I am not sure. I use it to enhance gloss that already was the result of applying a ceramic gloss finish. My vehicle did not have a Matt finish to begin with.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/41R+OlNeTrL._AC_SL1200_.jpg

XPEL

XPEL - R1390 Ceramic Boost 16 oz -Si02 Silica Based Spray That Creates a Super Slick Finish Beads and Repels Water

Item #:25908288

4.7 rating

Write a review

PKR 13335

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

XPEL Ceramic Boost helps protect your film and paint by sealing the surface with a micro-thin layer of protection to help resist debris, while repelling dust and lint.

Product Details

Features & Benefits

Seals the surface with a micro thin layer of protection
Helps resist debris, scratches, and contaminates
Repels dust and lint
Makes the surface slick and shiny
Can be used with XPEL FUSION PLUS
Made in the USA

Product Description

XPEL - R1390 Ceramic Boost 16 oz -Si02 Silica Based Spray That Creates a Super Slick Finish Beads and Repels Water

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is XPEL Ceramic Boost?
Answer : XPEL Ceramic Boost is a product that seals the surface of your film and paint with a micro-thin layer of protection, while repelling dust and lint. It helps resist debris, scratches, and contaminates.
Question : What are the benefits of using XPEL Ceramic Boost?
Answer : XPEL Ceramic Boost makes your surface slick, increases shine, and helps repel dust and lint. It can be used with XPEL FUSION PLUS, or as a standalone sealant.
Question : Where is XPEL Ceramic Boost made?
Answer : XPEL Ceramic Boost is made in the USA.
Question : Trying to maintain the satin finish of xpel stealth coated with ceramic pro and not add too much shine. only cg meticulous matte, or will this work?
Answer : All these boost products protect the existing finish as it is, whether it's matt or high gloss, all they do is provide a hydrophobic layer on top of your finish. They do not add any additional shine to your finish, they just accentuate what you already have, you need to have a very clean surface when you apply these products...
Question : What's the difference between ceramic boost spray and the xpel sealant?
Answer : The Ceramic Boost product is meant to be applied on top of ceramic coated paint surfaces. It refreshes the slick super smooth feeling of the surface allowing surface dirt like bird poop, splattered bugs, and road tar to wipe off a lot easier. The boost spray can be applied to any painted surface, but I'm not sure it offers much additional protection to non-ceramic coated surfaces.
Question : Does your vehicle have to be ceramic coated to use this product?
Answer : Yes, but your question is very valid for the next iteration of this product, ceramic waxes. If you are not blessed with a ceramic coat, use Griot’s spray on wax…. But if you have such a coating, this product is excellent
Question : Is this safe to use on black trim or do I need to make sure it only goes on painted surfaces?
Answer : The bottle does not warn about using the product on non-painted surfaces, so it would probably work fine. But, there are plenty of better and cheaper products for protecting plastic and rubber trim.
Question : What is the approximate longevity if used solo?
Answer : Hard to say, but probably similar to other spray-on ceramic detail sprays. I'd say a month or two depending on the conditions. I only use it on the Xpel PPF, but there's no reason you can't use it on the entire car. Beads nicely and slick finish.
Question : Hi, should I first wax the car and then apply Ceramic boost? Thank u
Answer : My car is ceramic coated so I just use the boost periodically. Not sure what it will do if it is just waxed.
Question : What percentage of this product is infused with sio2 ceramic coating?
Answer : Hard to say, I imagine it would be proprietary for XPEL, it works very well and is super slick
Question : What type of material should I use to apply this product?
Answer : I would use an edgeless microfiber towel.
Question : I just wrapped my vehicle in matte and applied xpel fusion plus ceramic coat. How long should I wait before using this and how often should I use it?
Answer : I had mine done about 3 months ago and the XPEL dealer told me to wait 10-12 days before washing it and applying this spray. Now, I wash the car every other weekend and I apply this spray at that time, every other weekend.
Question : Will this add unwanted gloss to a matte finish?
Answer : I am not sure. I use it to enhance gloss that already was the result of applying a ceramic gloss finish. My vehicle did not have a Matt finish to begin with.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

XPEL - R1390 Ceramic Boost 16 oz -Si02 Silica Based Spray That Creates a Super Slick Finish Beads and Repels Water

XPEL - R1390 Ceramic Boost is a spray-on ceramic detail spray designed to be used on top of ceramic coated paint surfaces. It refreshes the slick feeling of the surface and makes it easier to remove dirt and contaminants. This product is especially recommended for cars with XPEL clear wrap. It provides a long-lasting shine and hydrophobic properties. However, it is not recommended for use on non-painted surfaces such as black trim, and there are better and cheaper products available for protecting plastic and rubber trim. The longevity of the product depends on the conditions, but it is estimated to last about a month or two when used solo. Apply the product with an edgeless microfiber towel. It is safe to use after waiting for 10-12 days following the application of XPEL fusion plus ceramic coat. The product adds gloss to the finish and enhances the shine of the ceramic coating. Overall, XPEL - R1390 Ceramic Boost is a highly recommended product for maintaining the shine and hydrophobic properties of ceramic coated cars.

Pros

Refreshes slick feeling of the surface
Makes it easier to remove dirt and contaminants
Provides long-lasting shine and hydrophobic properties
Safe for use on ceramic coated paint surfaces
Adds gloss to the finish and enhances shine

Cons

Not recommended for use on non-painted surfaces such as black trim
Better and cheaper products available for protecting plastic and rubber trim
Longevity depends on conditions and may last about a month or two when used solo

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

XPEL - R1390 Ceramic Boost 16 oz -Si02 Silica Based Spray That Creates a Super Slick Finish Beads and Repels Water

View Cart & Checkout