What is the maximum current rating of FLEXmax charge controllers?

FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively.

What is the maximum ambient temperature in which FLEXmax charge controllers can operate at their full maximum current rating?

FLEXmax charge controllers can operate at their full maximum current rating in ambient temperatures as high as 104°F (40°C).

What are the nominal battery voltages supported by FLEXmax charge controllers?

FLEXmax charge controllers support a wide range of nominal battery voltages: 12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up).

Will this support lifepo4 batteries?

Yes, you just need to program the controller per the battery manufacturer recommendations.

Does this unit operate at 12, 24 & 48 Volts or only 12 volts?

This can operate at 12, 24 or 48 volts.

Can I use this on a 220volt system?

The Outback FM 60 is capable of a maximum 150 open circuit DC voltage input from a solar array to charge a battery bank of 12, 24, 36,48 or 60 VDC nominal.

Can this be used to charge a 12v battery bank from a 24v solar panel bank?

Yes, it can have solar PV input of open circuit voltages up to 150VDC and charge battery banks from 12 to 60 VDC nominal.

How do you adjust your system to limit the drain on your batteries?

The Outback Power FM60 does not control the power being taken from the battery bank. If using an Outback Power FX inverter and with a HUB and a MATE interface the inverter can be programmed to shut down when a selected battery voltage has been reached.

Yes, it is mppt and is one of the best on the market.

Does this need to be mounted vertically?

It would be difficult but not impossible to read the display and make adjustment reading it sideways or upside down.

Does flexmax60 have a standard setting for lifepo4 batteries?

No, you have to set custom parameters.

What is the maximum input wattage for a 12 volt system?

The current limit is 30 Amps, so for a 12 volt system it would be 360 Watts. It depends on your current draw.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/71dUPi96mAL._AC_SL1396_.jpg

Outback

OutBack Power FM60-150VDC FLEXMax 60 Charge Controller

Item #:6281239

4.7 rating

Write a review

PKR 186979

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Increases PV Solar Array Output to battery bank by up to 30%.Designed for charging from your solar array to battery banks with nominal design voltages from 12 to 60 VDCFully Programmable and Built-in 128 Days of Data Logging.

Product Details

Color
Brand
Voltage
Item Weight
Display Type

Features & Benefits

Increases PV Solar Array Output to battery bank by up to 30%
Designed for charging from your solar array to battery banks with nominal design voltages from 12 to 60 VDC
Fully Programmable and Built in 128 Days of Data Logging.

Product Description

OutBack Power FM60-150VDC FLEXMax 60 Charge Controller

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the maximum current rating of FLEXmax charge controllers?
Answer : FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively.
Question : What is the maximum ambient temperature in which FLEXmax charge controllers can operate at their full maximum current rating?
Answer : FLEXmax charge controllers can operate at their full maximum current rating in ambient temperatures as high as 104°F (40°C).
Question : What are the nominal battery voltages supported by FLEXmax charge controllers?
Answer : FLEXmax charge controllers support a wide range of nominal battery voltages: 12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up).
Question : Will this support lifepo4 batteries?
Answer : Yes, you just need to program the controller per the battery manufacturer recommendations.
Question : Does this unit operate at 12, 24 & 48 Volts or only 12 volts?
Answer : This can operate at 12, 24 or 48 volts.
Question : Can I use this on a 220volt system?
Answer : The Outback FM 60 is capable of a maximum 150 open circuit DC voltage input from a solar array to charge a battery bank of 12, 24, 36,48 or 60 VDC nominal.
Question : Can this be used to charge a 12v battery bank from a 24v solar panel bank?
Answer : Yes, it can have solar PV input of open circuit voltages up to 150VDC and charge battery banks from 12 to 60 VDC nominal.
Question : How do you adjust your system to limit the drain on your batteries?
Answer : The Outback Power FM60 does not control the power being taken from the battery bank. If using an Outback Power FX inverter and with a HUB and a MATE interface the inverter can be programmed to shut down when a selected battery voltage has been reached.
Question : Is it mppt?
Answer : Yes, it is mppt and is one of the best on the market.
Question : Does this need to be mounted vertically?
Answer : It would be difficult but not impossible to read the display and make adjustment reading it sideways or upside down.
Question : Does flexmax60 have a standard setting for lifepo4 batteries?
Answer : No, you have to set custom parameters.
Question : What is the maximum input wattage for a 12 volt system?
Answer : The current limit is 30 Amps, so for a 12 volt system it would be 360 Watts. It depends on your current draw.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

OutBack Power FM60-150VDC FLEXMax 60 Charge Controller

The Outback Flexmax 60 Charge Controller is a versatile, programmable charge controller with the capacity to support 12V, 24V, 36V, 48V, and 60V DC nominal battery systems with open circuit input voltages reaching up to 150V DC. It features a cooling fan that can be loud during use, but it turns off after a few minutes. The charge controller auto-detects battery voltage and has user-adjustable settings to enable charging of different battery types, including lifepo4 batteries. With proper programming per battery type and efficient oversized heat sink cooling, this device can support up to 60 amps of output. An Outback hub is required to enable networked system monitoring of multiple Flexmax 60 controllers. Overall, the customer feedback for the device is positive.

Pros

Versatile charge controller with capacity to support multiple battery types
Auto-detects battery voltage
Programmable for efficient battery charging per battery type
Can support up to 60 amps of output

Cons

Loud cooling fan during use
Wiring adjustments may be necessary during installation

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

OutBack Power FM60-150VDC FLEXMax 60 Charge Controller

View Cart & Checkout