What is the opening size of the bench vise?

The opening size of the bench vise is 125mm(5")

What is the clamp force of the bench vise?

The clamp force of the bench vise is at least 5500lbs

What is the material of the bench vise?

The bench vise is made of high strength cast iron and ductile iron

Are the jaws square and closing together precisely? Does the jaw rotation lock very firmly or is it hard to lock very tight?

The jaws are square and close precisely together. The jaw rotation locks firmly and tightens easily.

I would be using it for blacksmithing. Will it withstand hammer blows to metal/items held in the vise? And will it withstand the heat of hot metal?

It can withstand hammer blows to metal/items held in the vise. However, extreme heat may alter the vise material properties, so it is better not to hold extremely hot metal.

How long have you had this vice and has it held up to demanding tasks?

I've had it for a couple of months and it has held up well. It has been used for various tasks including beating and making brackets.

Is the vise made in America?

The vise is not made in America. It comes from China.

What is the clamping strength of the vise?

The clamping strength of the 5-inch bench vise is at least 5500 lb.

Does the jaws rotation lockup give when bearing down on a workpiece heavily?

No, the jaws rotation does not give when bearing down heavily. It is a very sturdy piece.

How many positions can the vise be rotated and locked down?

The vise can be rotated 360 degrees on the swivel base and the head can also rotate 360 degrees.

Is the jaw rotation indexed? Or does it only rely on the locking screw to keep it from rotating?

Yes, the jaw rotation is indexed. The base has bosses that the base indexes on. The locking screw further ensures it does not rotate.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

Forward

Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil 5, Ductile Iron

Item #:32711943

4.7 rating

Write a review

PKR 52512

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

More Durable and Sturdy Heavy Duty Bench Vise with Anvil and 360-Degree Swivel Base

Product Details

Material
Brand
Color
Style
Clamp Width
Tensile Strength
UPC
Manufacturer
Country of Origin
Date First Available
What is in the box

Features & Benefits

Jaw width:152.4mm(6"), Opening: 125mm(5"), Throat Depth: 66.6mm(2 5/8"), Clamp force: at least 5500lbs
Updated material: high strength cast iron and ductile iron
Multifunctional: suitable for grinding, cutting, tapping work and more
Higher clamping force, Longer opening, Bigger anvil, Deeper throat depth, Wider jaw
Round workpiece clamping; Microgroove tooth space for better grip
360 degree swivel base providing unlimited clamping space

Product Description

Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil 5, Ductile Iron

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the opening size of the bench vise?
Answer : The opening size of the bench vise is 125mm(5")
Question : What is the clamp force of the bench vise?
Answer : The clamp force of the bench vise is at least 5500lbs
Question : What is the material of the bench vise?
Answer : The bench vise is made of high strength cast iron and ductile iron
Question : Are the jaws square and closing together precisely? Does the jaw rotation lock very firmly or is it hard to lock very tight?
Answer : The jaws are square and close precisely together. The jaw rotation locks firmly and tightens easily.
Question : I would be using it for blacksmithing. Will it withstand hammer blows to metal/items held in the vise? And will it withstand the heat of hot metal?
Answer : It can withstand hammer blows to metal/items held in the vise. However, extreme heat may alter the vise material properties, so it is better not to hold extremely hot metal.
Question : How long have you had this vice and has it held up to demanding tasks?
Answer : I've had it for a couple of months and it has held up well. It has been used for various tasks including beating and making brackets.
Question : Is the vise made in America?
Answer : The vise is not made in America. It comes from China.
Question : What is the clamping strength of the vise?
Answer : The clamping strength of the 5-inch bench vise is at least 5500 lb.
Question : Does the jaws rotation lockup give when bearing down on a workpiece heavily?
Answer : No, the jaws rotation does not give when bearing down heavily. It is a very sturdy piece.
Question : How many positions can the vise be rotated and locked down?
Answer : The vise can be rotated 360 degrees on the swivel base and the head can also rotate 360 degrees.
Question : Where is this made?
Answer : The vise is made in China.
Question : Is the jaw rotation indexed? Or does it only rely on the locking screw to keep it from rotating?
Answer : Yes, the jaw rotation is indexed. The base has bosses that the base indexes on. The locking screw further ensures it does not rotate.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil 5, Ductile Iron

This 5-inch bench vise is made from high strength ductile iron and can withstand hammer blows to metal or steel stock bars. Its jaws are square, close precisely, and can rotate 360 degrees. The vise can be used for a variety of projects, from sprinkler pipes to knife-making, and its swivel head makes it versatile. However, it may not hold as big of items as some vises due to its limited jaw depth, and it is made in China. Customers generally were happy with their purchase, feeling it is sturdy, well-built, and operates smoothly.

Pros

Made from high strength ductile iron
Can withstand hammer blows to metal or steel stock bars
Jaws are square, close precisely, and can rotate 360 degrees
Swivel head makes it versatile
Sturdy and well-built
Operates smoothly

Cons

Limited jaw depth may not hold big items
Made in China
More expensive online than in local stores

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil 5, Ductile Iron

View Cart & Checkout