What is the main purpose of the Eldwviz Mist Coolant Lubrication Spray System?

The main purpose is to cool, lubricate and blow away metal chips during CNC machining, making work safer and more efficient.

What type of output does this system have?

This system does not have pressure output, it is suitable for liquids that do not require pressure output to ensure that the air pressure is within the range.

What machines is this system compatible with?

This system is compatible with 8mm air ducts of CNC lathes and milling machines, and is widely used in stone/metal/tile engraving machines, as well as CNC lathes, milling machines and drilling machines.

Do I need to connect a pump for the fluid or does it work by Venturi effect?

You might need to tune it slightly to optimize the Venturi effect for good atomization.

Why does the unit blow back into the jug and air bleed through the flex part?

Adjust the nozzle and watch the liquid being drawn up the suction pipe to mist the liquid properly.

What is the size of the coolant hose?

The coolant hose size is 1/8 inches.

Where can I get more sections to make hose longer?

You can get more sections at most hardware stores.

Does the valve turn off the air flow?

Yes, the valve turns off the air flow.

Are the air pressure requirements correct?

The unit works with as little air as desired and can be adjusted accordingly for different tasks.

Why does the unit blow back into the jug when turned on?

Check if the nozzle is blocked.

Can this be used for flood coolant with a pump instead of air?

Yes, close off the air port and use a light-duty pump on the hose siphon end.

What is the length of the flex portion of the hose?

The flex portion of the hose is only a few inches long.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/51wydt5Ls6L._AC_SL1500_.jpg

Eldwviz

Mist Coolant Lubrication Spray System For 8mm Air Pipe CNC Lathe Milling Drill 1

Item #:1643586

4.7 rating

Write a review

PKR 5518

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Improve efficiency and save time, the Eldwviz Mist Coolant Lubrication Spray System is the all-in-one solution for cooling, lubricating and blowing metal chips during CNC machining, making work safer and reducing machining costs.

Product Details

Brand
Material
Style
Included Components
Hose Length

Features & Benefits

High quality material of plastic metal and brass
Easy to use with adjustable air flow and spray volume
Special design for rotating direction and adjustable atomizer gas and coolant
Improves cutting speed and reduces machining costs
Suitable for CNC lathes, milling machines, drilling machines and stone/metal/tile engraving machines

Product Description

Mist Coolant Lubrication Spray System For 8mm Air Pipe CNC Lathe Milling Drill 1

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : What is the main purpose of the Eldwviz Mist Coolant Lubrication Spray System?
Answer : The main purpose is to cool, lubricate and blow away metal chips during CNC machining, making work safer and more efficient.
Question : What type of output does this system have?
Answer : This system does not have pressure output, it is suitable for liquids that do not require pressure output to ensure that the air pressure is within the range.
Question : What machines is this system compatible with?
Answer : This system is compatible with 8mm air ducts of CNC lathes and milling machines, and is widely used in stone/metal/tile engraving machines, as well as CNC lathes, milling machines and drilling machines.
Question : Do I need to connect a pump for the fluid or does it work by Venturi effect?
Answer : You might need to tune it slightly to optimize the Venturi effect for good atomization.
Question : Why does the unit blow back into the jug and air bleed through the flex part?
Answer : Adjust the nozzle and watch the liquid being drawn up the suction pipe to mist the liquid properly.
Question : What is the size of the coolant hose?
Answer : The coolant hose size is 1/8 inches.
Question : Where can I get more sections to make hose longer?
Answer : You can get more sections at most hardware stores.
Question : Does the valve turn off the air flow?
Answer : Yes, the valve turns off the air flow.
Question : Are the air pressure requirements correct?
Answer : The unit works with as little air as desired and can be adjusted accordingly for different tasks.
Question : Why does the unit blow back into the jug when turned on?
Answer : Check if the nozzle is blocked.
Question : Can this be used for flood coolant with a pump instead of air?
Answer : Yes, close off the air port and use a light-duty pump on the hose siphon end.
Question : What is the length of the flex portion of the hose?
Answer : The flex portion of the hose is only a few inches long.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

Mist Coolant Lubrication Spray System For 8mm Air Pipe CNC Lathe Milling Drill 1

The Eldwviz Mist Coolant Lubrication Spray System is an affordable option that provides decent functionality. There is no need for a pump, but adjustments need to be made to the nozzle and air supply to get it to work successfully. The coolant hose is tiny, but effective, but the valve can turn off the air. This product is not for everyone, as some customers had parts that lacked holes or were junky, but others found it to work fabulously, even better than pricier alternatives. A regulator, tubing, and fittings need to be purchased separately, which can be a hassle. Overall, the Eldwviz Mist Coolant Lubrication Spray System works for many needs and is of high quality, although it's important to carefully test and check connections, and it may vary with parts.

Pros

Affordable and provides decent performance
No need for a pump
Tiny but effective coolant hose

Cons

Adjustments need to be made to nozzle and air supply
Some customers received junky or faulty parts
Regulator, tubing, and fittings need to be purchased separately

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

Mist Coolant Lubrication Spray System For 8mm Air Pipe CNC Lathe Milling Drill 1

View Cart & Checkout