Will it leave any sticky residue behind?

No, it removes easily without leaving residue.

What types of surfaces is this tape suitable for?

Wood floors, wallpaper, cabinets, painted drywall, and freshly painted walls (painted at least 24 hours ago).

Can this be used to glue together plastic bottles? I am making a boat out of plastic bottles. Any advice?

No, it doesn't stick well to plastic. West system epoxy may be a better option, although it could generate heat and melt the plastic in some places.

Is it gasoline proof?

I'm not sure about gasoline, but it melts away with acetone.

Can I use this product to seal a small hole below the water line in a brand new kayak?

Yes, you can use this. However, you might want to consider using 3M 5200FC / 06535 Marine Adhesive sealant for a small hole. It cures in 48 hours.

Will this bond plastic to aluminum?

It might hold if you coat the whole area, but it may not securely bond to smooth aluminum surfaces long-term. It works well on plastics, wood, cloth, or rubber surfaces.

Could I use this to adhere a hard plastic plate to an aluminum Jon boat to attach a transducer?

You should be fine using this product. Just make sure to secure the plate properly with screws and consider using 2-part epoxy for added strength. If you have a fiberglass boat, make sure to follow proper procedures to avoid compromising any wood.

Can this be used to glue/attach magnets back on the flywheel of a boat motor?

Yes, it should work well and provide a strong bond.

Will this work on a bad seam on a PVC covert pipe on the inside while leaking?

No, it won't work while the pipe is leaking. Try using flex seal tape instead.

Will this work to glue PVC planks to a mobile home bathroom ceiling?

It will take about 5 days to cure. It might be better to use construction adhesive instead.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/6154aDqHkIL._SL1500_.jpg

3M TALC Marine Adhesive Sealant 5200 - Permanent Bonding and Sealing for Boats and Marine Applications - Black - 3 Ounces

Item #:36770335

4.7 rating

Write a review

PKR 9434

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Scotch Delicate Surface Painter's Tape for a professional look that's easy on your surfaces.

Product Details

Is Discontinued By Manufacturer
Product Dimensions
Item model number
Department
Date First Available
Manufacturer
ASIN
Country of Origin

Features & Benefits

Gentle adhesive for surfaces that require extra care
Stays on surfaces for up to 60 days
Removes easily without leaving residue
Edge Lock Technology for sharp paint lines
Ideal for accent walls, decorative stripes, and patterns
Provides a professional look

Product Description

3M TALC Marine Adhesive Sealant 5200 - Permanent Bonding and Sealing for Boats and Marine Applications - Black - 3 Ounces

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : How long can this tape stay on surfaces?
Answer : Up to 60 days.
Question : Will it leave any sticky residue behind?
Answer : No, it removes easily without leaving residue.
Question : What types of surfaces is this tape suitable for?
Answer : Wood floors, wallpaper, cabinets, painted drywall, and freshly painted walls (painted at least 24 hours ago).
Question : Can this be used to glue together plastic bottles? I am making a boat out of plastic bottles. Any advice?
Answer : No, it doesn't stick well to plastic. West system epoxy may be a better option, although it could generate heat and melt the plastic in some places.
Question : Is it gasoline proof?
Answer : I'm not sure about gasoline, but it melts away with acetone.
Question : Will 3m 5200 work on rubber?
Answer : Yes, clean before applying.
Question : Can I use this product to seal a small hole below the water line in a brand new kayak?
Answer : Yes, you can use this. However, you might want to consider using 3M 5200FC / 06535 Marine Adhesive sealant for a small hole. It cures in 48 hours.
Question : Will this bond plastic to aluminum?
Answer : It might hold if you coat the whole area, but it may not securely bond to smooth aluminum surfaces long-term. It works well on plastics, wood, cloth, or rubber surfaces.
Question : Could I use this to adhere a hard plastic plate to an aluminum Jon boat to attach a transducer?
Answer : You should be fine using this product. Just make sure to secure the plate properly with screws and consider using 2-part epoxy for added strength. If you have a fiberglass boat, make sure to follow proper procedures to avoid compromising any wood.
Question : Can this be used to glue/attach magnets back on the flywheel of a boat motor?
Answer : Yes, it should work well and provide a strong bond.
Question : Will this work on a bad seam on a PVC covert pipe on the inside while leaking?
Answer : No, it won't work while the pipe is leaking. Try using flex seal tape instead.
Question : What caulk gun would be best for this glue?
Answer : Any caulk gun will work.
Question : Will this work to glue PVC planks to a mobile home bathroom ceiling?
Answer : It will take about 5 days to cure. It might be better to use construction adhesive instead.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

3M TALC Marine Adhesive Sealant 5200 - Permanent Bonding and Sealing for Boats and Marine Applications - Black - 3 Ounces

The 5200 adhesive is a versatile product that works well with most materials, including aluminum boats and RV roofs, and comes in various colors. It can be used to attach tiles to a bowl for a bird bath or glue sheet metal and vinyl flooring on marine plywood, with the caveat that it may take time to cure. The nozzle extension for the 3oz version can be cleaned with a drill bit, but users should avoid using solvents as this may melt the adhesive. On the downside, it has a long curing time, and UV exposure may break it down. The adhesive works best when applied correctly and quickly, as it can flow a bit. Some customers have reported good results using it to attach and seal switches to their boats or repair tubs in RVs. However, one user reported a strange yellow reaction when using it around a shower nook, so it may not be suitable for all applications.

Pros

Versatile and can adhere to most materials
Works for various applications, including boats, RVs, and showers
Comes in different colors
Stays flexible and won't crack or break after application

Cons

Long curing time
UV exposure may damage it
May flow a bit when applied and difficult to remove when dried

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

3M TALC Marine Adhesive Sealant 5200 - Permanent Bonding and Sealing for Boats and Marine Applications - Black - 3 Ounces

View Cart & Checkout