Can custom functions be created on Timer Delay Module?

Yes, the programmer can load a set of standard functions as well as custom functions created based on the specific requirements.

What is the size and origin of Timer Delay Module?

The module is made in the USA and has a small packaging of 28x23x9mm.

What is the capacity of the Timer Delay Module?

The circuit can support up to 5 amps.

Would a 3V battery be able to power a mini vibrating motor on your 5V model?

We have a 3V timer version specifically designed for a 3-5V power supply voltage.

Can the timer fade three LED courtesy lights in a vehicle?

Yes, the timer can be used to control lights with effects like soft startup and dimming. Just configure the timer Output Mode to Gradual output to create these effects.

Can the miniature timer turn on a 12 volt water pump for 30 seconds every fifteen minutes?

Yes, the small miniature timer can perform on/off cycling with a delay from 0.1 seconds to 9999 hours. It supports 5V, 12V, and 18V DC with a maximum current rating of 5A. Suitable for both industrial control and hobby use.

What is the part number for the programming tool?

The part number for the programming tool is ‎CNFBRD1, but it is currently unavailable on Amazon (as of 08NOV21). Alternatively, you can build a programming tool using two push buttons.

Can the timer be used to power test a small buzzer for a few seconds when the ignition switch on a boat is turned on?

Yes, this timer can easily accomplish that task.

What is the power draw in milliampere-hours (mAh)?

The power draw for the 12V timer is approximately 4 to 5 milliamperes (mA).

Can this timer be used to send a signal to a button every hour?

It depends on the specific setup. The timer module's relay can be used to drive a button with +12V, but it is recommended to use a small low current 12V relay for protection. Installing a flyback diode across the relay inputs is also suggested to protect the electronics in the timer module.

Can this timer be used for a one-time power on, then off until energized again?

Yes, this timer has versatile functionality and can be used as an 'off delay' timer. By referring to the timer function charts provided, you can determine if it suits your specific requirements.

Can this timer be used to release an underwater sensor at a predetermined date and time?

No, this timer may not be suitable for that application. It requires real-time programming, and there is no option for programming a specific day or time.

Can it turn on a cabin LED lamp for 30 seconds if the ignition is turned off and turn it off again if the ignition is turned on during the timer?

Yes, the timer can perform this function. You can use function 17 for this specific task.

Explore

Shop By Category

Added to Cart

Your shopping cart is emptyLets Change that !Continue Shopping

https://m.media-amazon.com/images/I/71pHH3oIoNL._AC_SL1500_.jpg

XDP

Small Miniature Timer on Off Cycling delay Relay 0.1 sec to 9999 Hours. 3V 12V 18V DC 5A. Power On Off delay, Cycling. Industrial Control and Hobby. and Programmer

Item #:4734694

4.7 rating

Write a review

PKR 15312

This product is not Fulfilled by Ubuy and can take minimum 10 days in delivery. We might cancel the product from the order and refund you if any issue arise with the delivery of this product.

Availability : In Stock

Quantity :

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120.). Recommended power converters Buy Now.

Our Top Logistics Partners

Universal Timer delay module allows delaying power or disconnecting power after preset period of time. It is Perfect for many applications from hobby to industrial controls and can be configured to delay power, supply power for a period of time or cycle power with preset delay.

Product Details

Features & Benefits

Delay from 0.1 sec to 400 days
25+ time functions
External trigger
3 18 Vdc
5 amp
Configurations are done via phone, tablet or laptop

Product Description

Small Miniature Timer on Off Cycling delay Relay 0.1 sec to 9999 Hours. 3V 12V 18V DC 5A. Power On Off delay, Cycling. Industrial Control and Hobby. and Programmer

Overview

Have any Query?Chat with us

Customer Questions & Answers

Question : Can custom functions be created on Timer Delay Module?
Answer : Yes, the programmer can load a set of standard functions as well as custom functions created based on the specific requirements.
Question : What is the size and origin of Timer Delay Module?
Answer : The module is made in the USA and has a small packaging of 28x23x9mm.
Question : What is the capacity of the Timer Delay Module?
Answer : The circuit can support up to 5 amps.
Question : Would a 3V battery be able to power a mini vibrating motor on your 5V model?
Answer : We have a 3V timer version specifically designed for a 3-5V power supply voltage.
Question : Can the timer fade three LED courtesy lights in a vehicle?
Answer : Yes, the timer can be used to control lights with effects like soft startup and dimming. Just configure the timer Output Mode to Gradual output to create these effects.
Question : Can the miniature timer turn on a 12 volt water pump for 30 seconds every fifteen minutes?
Answer : Yes, the small miniature timer can perform on/off cycling with a delay from 0.1 seconds to 9999 hours. It supports 5V, 12V, and 18V DC with a maximum current rating of 5A. Suitable for both industrial control and hobby use.
Question : What is the part number for the programming tool?
Answer : The part number for the programming tool is ‎CNFBRD1, but it is currently unavailable on Amazon (as of 08NOV21). Alternatively, you can build a programming tool using two push buttons.
Question : Can the timer be used to power test a small buzzer for a few seconds when the ignition switch on a boat is turned on?
Answer : Yes, this timer can easily accomplish that task.
Question : What is the power draw in milliampere-hours (mAh)?
Answer : The power draw for the 12V timer is approximately 4 to 5 milliamperes (mA).
Question : Can this timer be used to send a signal to a button every hour?
Answer : It depends on the specific setup. The timer module's relay can be used to drive a button with +12V, but it is recommended to use a small low current 12V relay for protection. Installing a flyback diode across the relay inputs is also suggested to protect the electronics in the timer module.
Question : Can this timer be used for a one-time power on, then off until energized again?
Answer : Yes, this timer has versatile functionality and can be used as an 'off delay' timer. By referring to the timer function charts provided, you can determine if it suits your specific requirements.
Question : Can this timer be used to release an underwater sensor at a predetermined date and time?
Answer : No, this timer may not be suitable for that application. It requires real-time programming, and there is no option for programming a specific day or time.
Question : Can it turn on a cabin LED lamp for 30 seconds if the ignition is turned off and turn it off again if the ignition is turned on during the timer?
Answer : Yes, the timer can perform this function. You can use function 17 for this specific task.

Customer Ratings

4.7 out of 5

197 customers ratings

5 star
79%
4 star
11%
3 star
7%
2 star
2%
1 star
1%

Review this product

Share your thoughts with other customers

Small Miniature Timer on Off Cycling delay Relay 0.1 sec to 9999 Hours. 3V 12V 18V DC 5A. Power On Off delay, Cycling. Industrial Control and Hobby. and Programmer

This Small Miniature Timer on Off Cycling delay Relay 0.1 sec to 9999 Hours is a versatile timer useful for industrial control and hobbyists. This timer can power various devices such as lights, water pumps, and small buzzers. The users can configure the timer's output mode to gradual output, allow soft start-up, and dimming effects. The company provides useful how-to videos to assist with programming, and the manuals are easy to understand. Customers found this timer easy to use and program and did what they intended. It is a great value for the price. The device does require a bit of patience and careful programming for some users, but the company offers excellent customer services and helpful information.

Pros

Versatile
Useful for control appliances such as lights, water pumps, and small buzzers
Flexible and relatively easy to set up
Great value for the price
Excellent customer services and helpful information

Cons

Tricky and time-Consuming programming for some users
Some users wished for a PCB version with screw terminals and a quick disconnect for programming.

Important Information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

Small Miniature Timer on Off Cycling delay Relay 0.1 sec to 9999 Hours. 3V 12V 18V DC 5A. Power On Off delay, Cycling. Industrial Control and Hobby. and Programmer

View Cart & Checkout